Supported touchscreens

Last Updated: March 4, 2016

General Information

BrightSign players are compatible with USB touchscreens that use standard HID drivers. A touchscreen with standard HID drivers will work with any operating system that has HID drivers installed--without requiring additional drivers from the manufacturer. Be careful: some manufacturers say they support HID but still use custom drivers that are incompatible with BrightSign players.

We also provide custom drivers for Elo products.

Important: Don't forget to download and run the Calibration Script for your touchscreen.

Supported TouchScreen Models

The following list describes the amount of compatibility BrightSign players have with different touchscreen brands. For each brand, we list models (both single touch and gesture) that are known to be compatible, as well as models that are known to be incompatible. Models not explicitly listed here may be compatible, but we cannot guarantee that they will work.

The following list describes touchscreens that are compatible with the most recent version of firmware. Visit the Software Downloads page to get the most up-to-date firmware.

Note that gesture support is only available for XT, 4K, XD, HDx23, HDx22, and LS423 players, but multi-touch screens can still be used as single-touch screens. If a multi-touch screen is configured for backward compatibility to single-touch applications, gestures may not work correctly on BrightSign applications.

3M

We support 3M DST & Capacitive touch screens using both HID and custom drivers. Touch screen providers that use 3M technology include NEC, Planar, Horizon Displays, Samsung, Sharp, IBM, LG, Asus, Dell, and Sanyo. 

  • Supported (single touch): EXII 7010UC, EXII 7760UC, EXII 7730HC, 3M DST2270DX
  • Supported (gesture):
  • Not Supported:

Acer

  • Supported (single touch):
  • Supported (gesture): UT220HQL, T232HL, T230H, T231H
  • Not Supported:

BenQ

  • Supported (single touch):
  • Supported (gesture): IL420, TL550, T420
  • Not Supported:

Dell

  • Supported (single touch):
  • Supported (gesture):
  • Not Supported: ST2220T

Displax

  • Supported (single touch):
  • Supported (gesture): Skin Ultra, Skin Ultra Fit
  • Not Supported:

EETI

  • Supported (single touch):
  • Supported (gesture): eGalax 7200
  • Not Supported:

ELO

We support many Elo touch technologies, including IntelliTouch, which is the most commonly used Elo touch technology. The following manufacturers use Elo: Luvox, NEC, Planar, HP, and Sanyo. 

Intellitouch Plus (except 2515-07) touchscreens are supported by HDx20 and XD, XD2, HD2, 4K, LS BrightSign models with firmware version 4.7.144 or newer.


Intellitouch Plus models using the 2515-07 controller are supported on firmware 5.1.24 and newer on HDx20, HD2 (HDx22), XD (XDx30), and XD2 (XDx32) models, but NOT 4K, LS3, HD3, XD3 and XT3.
See this FAQ for a full  list of supported Intellitouch Plus touchscreens.

We do not support APR – Acoustic Pulse Recognition. Most models are available using different touch technologies, even if some are not listed as part numbers on Elo's website. 

  • Supported (single touch): Intellitouch, 1939L, 2639L
  • Supported (gesture): 2244L, 4600L
  • Supported (Intellitouch Plus): 4243L (p. E000444), 3201L(p. E415988), 2440 (p. E000415)
  • Not Supported: Intellitouch Plus not supported by HDx10 models, 4200L
  • Newly Supported (2515-07 Controller): Added support under Firmware 5.1.24 on HDx20, HDx22, XDx30, XDx32 models, but not 4K models. 3243L (p. E589724) will be supported when ELO switches to the 2521 controller in March 2014.  Additionally customers had previously reported problems with the Intellitouch Plus versions of the following models: 1523L(E394454), 1541L, 1940L, 2740L(E220828) and 3243L. These should be work with firmware 5.1.24 or later, again on HDx20 and newer excluding 4K models. 

Faytech

  • Supported (single touch): FT2200
  • Supported (gesture):
  • Not Supported:

GeneralTouch

  • Supported (single touch): RTL224
  • Supported (gesture):
  • Not Supported:

HP

  • Supported (single touch):
  • Supported (gesture): 2105tm, 2310ti, 4200tm
  • Not Supported:

I-TECH

BrightSign players should be compatible with any touchscreen that uses the eGalax driver. Touchscreen providers using eGalax include I-TECH NEC, Dell, and Planar.

  • Supported (single touch): EPM640-TR
  • Supported (gesture):
  • Not Supported:

Iiyama

  • Supported (single touch):
  • Supported (gesture): T2452MTS, T2452MTS-B1, T2735MSC, T1731SAW
  • Not Supported

LG

  • Supported (single touch): M4716T
  • Supported (Multi touch): 47WT30MS-B
  • Supported (gesture):
  • Not Supported:

LinITX

  • Supported (single touch): LinITX 7”, LinITX 8”
  • Supported (gesture):
  • Not Supported:

NEC

  • Supported (single touch):
  • Supported (gesture): OVL-V463 (overlay), MultiSync V462 TM**
  • Not Supported:

**Before you use this touchscreen with a BrightSign player, you must connect it to a Windows PC and run the "Lumio Crystal Touch Manager" application. Use the following settings: Linux OS, "Legacy HID Support" unchecked, and more than 1 touch.

Nexio

  • Supported (single touch):
  • Supported (gesture):
  • Not Supported: NIB 420

Nextwindow

  • Supported (single touch): 2700 (foil),
  • Supported (gesture): ProfileTouch 2S, ProfileTouch 5200
  • Not Supported: 2150 (foil)

Nitere

  • Supported (single touch):
  • Supported (gesture): AR150-2
  • Not Supported:

Philips

  • Supported (single touch):
  • Supported (gesture): DL4230ET, BDL5545ET
  • Not Supported: BDL4250

Planar

  • Supported (single touch): PS4660T, PCT2785 (27")**
  • Supported (gesture): PS4200, PXL2230MW, PXL2430MW
  • Not Supported: LC1913RTZ-C, LX55HDS-L* video wall, EP5804K-T 58"*, Planar PT7050 (Testing Fix in FW5.1.66)

**Requires FW version 4.7.106 or later. Both LX55HDS-L video wall, EP5804K-T 58" use PQlabs G4P controller. 

 

Samsung

  • Supported (single touch):
  • Supported (gesture): TM40LBC (ME40B)
  • Not Supported: Syncmaster 320TSN-2, 400TS, 400TS-3

Sharp

  • Supported (single touch):
  • Supported (gesture): PN-L602B

 

SunbriteTV

 

PRO Series Models (Outdoor)

   

32"

Landscape

Touch Screen

DS-3214TSL

 

Portrait

Touch Screen

DS-3214TSP

42"

Landscape

Touch Screen

DS-4217TSL

 

Portrait

Touch Screen

DS-4217TSP

47"

Landscape

Touch Screen

DS-4717TSL

 

Portrait

Touch Screen

DS-4717TSP

55"

Landscape

Touch Screen

DS-5517TSL

 

Portrait

Touch Screen

DS-5517TSP

       

MARQUEE series Models

(Outdoor)

 

47"

Landscape

Touch Screen

DS-4720TSL

 

Portrait

Touch Screen

DS-4720TSP

55"

Landscape

Touch Screen

DS-5525TSL

 

Portrait

Touch Screen

DS-5525TSP

U-Touch

  • Supported (single touch):
  • Supported (gesture): UT2700
  • Not Supported:

Visualplanet

  • Supported (single touch): single touch (foil)
  • Supported (gesture): Single User touchfoil - dual touch
  • Not Supported: MA9 (and other models that are not HID compliant)

Zytronic

  • Supported (single touch): BTC-ZXY-100-U-OFF-32-A, BTC-ZXY-100-U-OFF-64-A, BTC-ZXY-100-U-OFF-128-A
  • Supported (gesture):
  • Not Supported:

Note: Magictouch screens (http://www.magictouch.com/) are not currently supported.

Finding the USB Controller ID

If you’re unsure what touch controller your touchscreen model uses, check this list first.  If it is not listed there, you can help us find out what controller your screen uses by locating the USB VID:PID for the screen and forwarding it to support@brightsign.biz. You can normally find this information by connecting the touch screen to your computer and checking its properties in the Device Manager. The touch screen will normally be listed under Mouse and other pointing devices or under Human Interface Devices.

  1. Right-Click on the touch controller and choose Properties.
  2. Click on the Details tab in the Properties window.
  3. Select either Hardware ID or Device Instance ID.

For example: USB\VID_0EEF&PID_0001\5&262929C3&0&2

Have more questions? Submit a request

103 Comments

  • 0
    Avatar
    Sr. Support America

    Customer reported using this screen successfully with the BrightSign:

    http://www.i-techcompany.com/panelmountlcd1.html

    I-tech epm640tr (eGalax touch driver)

  • 0
    Avatar
    Sr. Support America

    Customer reported that this screen, PLANAR LC1913RTZ-C, is only suported under windows 7 and xp by planar

  • 0
    Avatar
    Sr. Support America

    Tech Global AC-61 touchscreen uses egalax driver, and works with new HD players using beta firmware 4.1.29.

  • 0
    Avatar
    JIMz

    Will support DELL ST2220T?

  • 0
    Avatar
    JohnLBV

    Has anyone confirmed if this will work with the DELL ST2220T yet?

  • 0
    Avatar
    Sr. Support America

    I've had two customers fail to get the dell to work. So, at the moment, it's not supported.

  • 0
    Avatar
    JohnLBV

    Thank you for the update.

  • 0
    Avatar
    Andrew Dunn

    Do support this touchscreen?

    The ProLite T2250MTS 22" Touch Screen is an early adaptor of the new 'MultiTouch' Technology. Based on the latest Optical sensor, the T2250MTS is Windows® 7 Compatible

  • 0
    Avatar
    Prea

    Do you still not support the ELO  ** Intellitouch Plus and APR – Acoustic Pulse Recognition**?

  • 0
    Avatar
    Alex Karbuiuk

    No, we don't support intellitouch plus and APR.

  • 0
    Avatar
    Michael

    We've successfully used ELO 2244L, 1939L, HP/Compaq 2105 with the BrightSigns. 

  • 0
    Avatar
    Alex Karbuiuk

    Customer reported using Nec MultiSync V462 TM screen successfully with the HD1020 (FW4.4.44, BA3.5.0.24).

  • 0
    Avatar
    Tom Claessen

    We would like to share with you all that Iiyama ProLite T2452MTS-B1 works with BS HD1010.

    Tom

    ShowTheme.nl

  • 0
    Avatar
    JohnLBV

    Has anyone tried the ViewSonic TD2220 yet? (supports the USB HID Touch driver)

    I'm looking for a reasonably priced 20"-24" widescreen display for programming/testing.  Many of the displays on this list seem to be discontinued now.

    Thanks!

    John

  • 0
    Avatar
    Walter

    John,

    We use a Planar PX 2230MW here for programming/testing.  USB touch works great with the HD and XD models.

    -Walter @ p-egd

  • 0
    Avatar
    Walter

    Working - ELO 4200L (PN#E841203), ELO 4600L (PN#E960985), ELO 2639L (PN#E324736), Planar PXL2230MW

    Working with work-around - Nextwindow 2700 Overlay, Portrait - Needs USB hub with XD unit or it is not recognized, works ok with HD units

    Working but not documented/supported - ELO 1547L over RS232 interface - Requires custom autorun with proper touchscreen initialization routine.

     

    -Walter @ p-egd

  • 0
    Avatar
    Michael

    Anyone know if the HP/Compaq L2206 will work with the BrightSign? I can't seem to find any info on who makes the touch screen technology for it, and no one locally has one for us to try out. The 2105's work great, but they've been discontinued so looking for an alternative in the same price-point.

  • 0
    Avatar
    David Archer

    Has the Samsung CY-TM40LBC - 40” Touch Overlay been tried and approved? 

    If not we need a recommendation for the Samsung ME40C. The PQ Labs 40" overlay failed.

  • 0
    Avatar
    Michael

    If you are looking for a 40" we have had good luck with the ELO 4200L just make sure it's the IntelliTouch model. They work great and look good to boot. They are a bit bulky though, but decent display and touchscreen is fast and works well.

  • 0
    Avatar
    Alfonso Descalzo

    So the ones in the list are supported?

    I need to know if the Hyunday D320MLI is supported, and the D405MLI is in the list...

     

  • 0
    Avatar
    Alex Karbuiuk

    This list http://touch-base.com/touch_device_list.asp helps you to find what controller your screen uses. It doesn't mean that all touchsreens that are mentioned there are supported by the brightsign.

    We don't have any records of customers using the Hyunday D320MLI touchscreen. Please contact the manufacturer to find out what kind of controller it uses, and whether the controller uses HID drivers. If it's HID, then no drivers are needed, and it should work with anything. We recommend testing.

     

  • 0
    Avatar
    Jamie Palmer

    Does the Samsung MagicTune Touch work with Brightsign? I am wanting to use a Samsung 24 inch Touch Screen Series 7 (S24C770T).

    Thanks.

  • 0
    Avatar
    Alex Karbuiuk

    Jamie, according to Samsung website, this screen is not compatible with linux, and our players are linux based. It may work, but the only way to confirm is to test it with the brightsign unit.

  • 0
    Avatar
    Alfonso Descalzo

    Tested with an Hyunday D320MLI.

    It works fine, but after some time, it seems not to respond correctly. If I reboot the unit it works ok again.

    Any idea of what could be the cause?

  • 0
    Avatar
    Alex Karbuiuk

    Alfonso, it could be the problem with your content or SD card. Please test with a different known good SD card. Format SD card in FAT32, then test again. Have you tested the project with a usb mouse? Unplug the touchscreen from the brightsign, connect a usb mouse. Open a presentation in BrightAuthor, go to File > Presentation Properties > Interactive tab, tick "always display cursor". Save and publish a presentation to SD card, power up the unit with SD card and a usb mouse connected, and test whether the problem persists or not. If the same issue happens with a mouse, then your presentation or SD card is the reason. What is the model of your brightsign unit? What firmware version is installed on the brightsign unit? Power up the unit without SD card - the firmware version will appear on the screen.

  • 0
    Avatar
    Alfonso Descalzo

    The BS is an XD1030, FW 4.6.66. Firstly I tested it with the "always display cursor", and it seems to be ok.

    Then, i quit the cursor and it seems to work ok too, but now my customer told me that when the unit is some time working fine, the problem appears..

    The instalation is far away, so i can´t test it as i´d like. The cards are the ones I use always, transcend I remember.

    I didn´t try with a mouse, but if it´s working for a time, i don´t know why it fails after some time, but as i understand, 

    it has not to be a problem with the touch screen, isn´t it?

    I´ll try to get more info about the problem. 

    Thanks

  • 0
    Avatar
    Alex Karbuiuk

    It's unlikely that the problem is with the touchscreen.

  • 0
    Avatar
    JohnLBV

    Isn't Transcend one of the brands of SD Cards that have been know to have issues with BrightSign players?

  • 0
    Avatar
    Alex Karbuiuk

    Yes, we don't recommend using the Transcend cards with the BrightSign players. Some customers have reported playback problems and IO errors with Transcend.

  • 0
    Avatar
    Alfonso Descalzo

    Cards changed, and the behaviour still the same.., It works fine, but after some time....

    Could the 110V current could cause some issues?..

     

    I don´t know what to think, the display is my only option, but it works for a time...

Please sign in to leave a comment.
Can't find what looking for? Try to
Powered by Zendesk