What IR remote commands does BrightAuthor:connected and BrightAuthor accept?

The following is a list of IR commands that are accepted by BrightAuthor:connected and BrightAuthor. This requires the Iguanaworks IR transceiver and a BrightSign player with a USB port. These values map directly to the BrightSign remote. If you're using a 3rd party remote control, you will need to use a plugin to accept IR commands and convert them to plugin events in your project. 
"WEST"
"EAST"
"NORTH"
"SOUTH"
"SEL"
"EXIT"
"PWR"
"MENU"
"SEARCH"
"PLAY"
"FF"
"RW"
"PAUSE"
"ADD"
"SHUFFLE"
"REPEAT"
"VOLUP"
"VOLDWN"
"BRIGHT"
Have more questions? Submit a request

5 Comments

  • 0
    Avatar
    Joel Marinaccio

    Where do we find these commands?  How do we get the HEX view of these commands?  

  • 1
    Avatar
    Daniel Johnson

    @Joel Marinaccio

    I just ran into this thread, thought I would add a link... I'm sure you have already resolved this, but for future reference, here is a link to the IR codes for both BrightSign remotes;

    https://brightsign.atlassian.net/wiki/spaces/DOC/pages/388435180/Remote+Control+Specifications+RC-1001+RC-1002

     

    Please note that we are still using the NEC code set, which is also the same as the Roku Soundbrige...

    Edited by Daniel Johnson
  • 0
    Avatar
    Dieter Guns

    Hi there,

    Speaking of a plugin for 3th party remotes.

    Is there an example/working plugin that does the trick?

    I have figured out the decimal values that my remote is sending out, but don't know how to translate them to the existing IR commands that BS is accepting.

    Thanks.

  • 0
    Avatar
    Mark Richards

    @Dieter,

    Kuowei Liao shared an example that looks like what you need in this thread:
     
    The download link for an example for converting IR codes to the existing BS commands was:
  • 0
    Avatar
    Rachel Yurkovich

    Can someone help me out I am looking for something along these lines-

    We have an XT1143 player connected via its serial port >> to IR connection in a Beetronics monitor https://www.beetronics.com/24-inch-monitor 

    These are the connections the monitor has:


    Looking for a way to turn the monitor ON and OFF through the BrightSign player.

    Using the HDMI connection worked in my testing but not on-exhibit where it is installed so I think the HDMI cord there isn't cooperating or something else...

Please sign in to leave a comment.
Can't find what you're looking for? Try to
Powered by Zendesk