Last Updated: November 5, 2014
Starting with BrightAuthor version 3.7.0.12, you can now stream unicast and multicast audio to BrightSign players using the Audio Stream state. This FAQ details the types of audio streams that are supported:
- Streaming Protocols: UDP, RTP, RTSP, HTTP
- Encapsulation: MPEG2 TS (transport stream)
- Codecs: MPEG2 Layer 1/2, MPEG2 Layer 3 (mp3), AAC, WAV
- Bitrates: Any supported by the codec
- Sample Rates: 32kHz, 44.1kHz, 48kHz
- Channels: Mono, stereo
- Other Technologies: Source-Specific Multicast (IGMPv3) streaming (requires FW 6.2.147 or later)
Note: If you are running into audio quality issues as a result of poor network performance, you can try increasing the size of the streaming buffer on the player.
4 Comments