BrightSign Support Manager
HD810 and HD1010 players come installed with YPbPr component connectors. Using a third-party VGA converter, you can also play component and composite video on other models.
There are many third-party VGA breakout cables; however, some VGA breakout cables will not work with the VGA port on a BrightSign player. You will need to ensure that the VGA converter you purchase has the same pin layout as outlined below:
| Pin 1 | Pin 2 | Pin 3 | |
| Component RGB | Red | Green | Blue |
| Component YPbPr | Pr | Y | Pb |
| S-Video | C | Y | -- |
| CVBS | -- | -- | CVBS |
In BrightAuthor:connected or BrightAuthor, configure the output for component/composite as follows:
Component: Select Component from the Connector type dropdown menu. In the Screen resolution dropdown menu, you may choose any 1080, 720, or 480 option, as well as the NTSC-COMPONENT and PAL-COMPONENT options.
S-Video or CVBS: Select HDMI from the Connector type dropdown menu. In the Screen resolution dropdown menu, you may choose the following options:
- PAL-N
- PAL-M
- PAL-I
- PAL-BG
- NTSC-M-JPN
- NTSC-M
1 Comments