Dear BS Community,
i am trying to change the whole audio volume of each player of an Master/Slave Setup. My setup consist of 8 XD1030 with latest FW one of them is the "master" the rest are slaves. Finally the master reacts to the keyboard input but slaves dont. Maybe i am kind of stupid but i cannot see the failure... Basicly i followed the "Real troubles with UDP Volume change sync" posting.
Thanks in advance
Sebastian
Looks like you are very close to a working solution.
Could you share the actual project files of the master and a slave?
Also, if you are sending UDP to 255.255.255.255, you might want to try
"All devices on the local subnet" (Less aggressive)
Thanks, i attached the files. https://www.dropbox.com/s/mnb67v4zrjzczdj/sync_vol.zip?dl=0
Possibly the slave volume is limited to 20?
My previous recommendation still stands: Send UDP to "All devices on the local subnet" instead of 255.255.255.255.
Also, for troubleshooting you could try and send UDP messages up/down to the slave from a tools such as Hercules or PacketSender.
https://www.hw-group.com/software/hercules-setup-utility
Thanks. The last thing i tried was to decrease volume on several spots in brightauthor. I tried presentation properties and Zone Volume on zone properties - nothing worked for me - the volume is still 100%. So i go with connector volume as entry evnt for the movie and it works. But i am curious about the other settings i tried - so i am far away from having a central sync event for my setup...
But unfortunately i am on a business trip til end of the week - so i will triy it next weekend.
Thanks in advance