0

Live Video Module w/HD1010

dallgx

October 26, 2009 02:02

None

Follow

Is anyone out there using the Live Video Module with the HD1010? I have seen live video exactly once during the course of a half-day of experimentation.

My setup is simple, one graphic zone (six 1024x768 .bmp files), one live video zone (320 x 240). I have configured for S-video and then for composite. The live module has a solid red indicator, only green when the thing was working (again, just once today).

HD1010 v3.1.73
Live video module
BrightAuthor v1.0.1.6

• Facebook
• Twitter
• LinkedIn

5 comments

• 0
  
  Clintonw October 26, 2009 09:59

  
  
  I have tested the VF-100's with no issue, make sure you have the correct input settings.  Create new project from scratch and just have the video input full screen, I have noticed that sometimes BA doesnt publish any updated/modified settings within a project, it will keep the very first settings.
  
• 0
  
  dallgx October 26, 2009 23:37

  
  
  Thanks for the quick response!
  
  
  
  My project cannot be full-screen live video, I need the stills and the video on the same display (zoned).  I had been erasing the entire card as yes, you are right, BA doesn't seem to "update" changes made the the base configuration.
  
  
  
  Did you learn what you have based on trial/error?  My extensive searchs have resulted in nearly zero forum hits and very little info on the brightsign.biz site.
  
  
  
  Thanks!
  
• 0
  
  RokuLyndon October 27, 2009 04:57

  
  
  Which version of windows are you guys using? And, which version of BA do you have?
  
  
  
  This is very odd. I have never seen this problem you report where published changes aren't made to the flash card or to the playlist. As a rule, I always publish to the same USB or SD card, even if it has content, and I've never had the content not update.
  
  
  
  In your case, you are seeing this both with new content added to the project, or just settings made to the playlist, with no content changes?
  
  
  
  Can you publish a simple project to a flash card, and zip it up, and then published an updated project to the same card and zip it up? And, send it to me at <!-- e --><a href="mailto:support@brightsign.biz">support@brightsign.biz</a><!-- e -->?
  
• 0
  
  fer October 28, 2009 16:09

  
  
  hi all,
  
  
  
  im having the same problem, ive tried starting a new project from scratch and it doesnt show anything from the live video module, ive left the video standard as "NTSC-M", and tried the input both "composite" and "s-video".
  
  i have a digital terrestrial television decoder conected to the live video, to change chanels while keeping the ticker and image zone.
  
  This decoder works with no problem with my tv, but it wont work on the live video module with the HD 1010, although the video module indicator is in green, any idea?
  
  
  
  thank you
  
• 0
  
  RokuLyndon November 04, 2009 00:31

  
  
  What firmware version are you running on the player?