First Brightsign device recieved but cannot setup.
So I have a BrightSign XT244 connected to work network on same subnet as my PC.
I have plugged in a spare 2GB microSD card and formated to Fat32.
The wizard then starts and says: connect via browser or connect USB keyboard to run setup. There is no USB port so not sure how they expect that second choice?!
Connect from PC via Firefox to XT244 and run through setup... click finish and nothing happens, just shows the blue banner Device Setup: Please wait for the device to complete setup process. I waited 2 hours and no change, device does not reboot no setup occurs.
If I refresh the page it just sends me back to the start of the setup.
I have gone to http://IPaddress/index.html and got the log:
0.000] Booting Linux on physical CPU 0x0
[ 0.000] Linux version 4.1.51-1.18+bs7.1.42 (jenkins@scoop) (gcc version 6.3.0 (GCC) ) #1 SMP Thu Jun 7 13:20:22 BST 2018
[ 0.000] CPU: AArch64 Processor [420f1000] revision 0
[ 0.000] Detected VIPT I-cache on CPU0
[ 0.000] moving dtb from 0x0000000048000000 to 0x0000000040000000
[ 0.000] Reserved memory: created CMA memory pool at 0x000000033f000000, size 16 MiB
[ 0.000] Reserved memory: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000] BMEM [0]: 1312 MiB @ 0x000000006e000000
[ 0.000] BMEM [1]: 664 MiB @ 0x00000000d6800000
[ 0.000] bmem: Reserved 1312 MiB at 0x000000006e000000
[ 0.000] bmem: Reserved 664 MiB at 0x00000000d6800000
[ 0.000] cma: dma_contiguous_reserve(limit 100000000)
[ 0.000] On node 0 totalpages: 1048576
[ 0.000] DMA zone: 12288 pages used for memmap
[ 0.000] DMA zone: 0 pages reserved
[ 0.000] DMA zone: 786432 pages, LIFO batch:31
[ 0.000] Normal zone: 4096 pages used for memmap
[ 0.000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000] psci: probing for conduit method from DT.
[ 0.000] psci: PSCIv0.2 detected in firmware.
[ 0.000] psci: Using standard PSCI v0.2 function IDs
[ 0.000] PERCPU: Embedded 17 pages/cpu @ffffffc2fef3c000 s31256 r8192 d30184 u69632
[ 0.000] pcpu-alloc: s31256 r8192 d30184 u69632 alloc=17*4096
[ 0.000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1032192
[ 0.000] Kernel command line:
[ 0.000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000] software IO TLB [mem 0xd27fe000-0xd67fe000] (64MB) mapped at [ffffffc0927fe000-ffffffc0967fdfff]
[ 0.000] Memory: 1999408K/4194304K available (8288K kernel code, 921K rwdata, 3224K rodata, 976K init, 477K bss, 2178512K reserved, 16384K cma-reserved)
[ 0.000] Virtual kernel memory layout:
[ 0.000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000] 0xffffffbdc0000000 - 0xffffffbdcc000000 ( 192 MB actual)
[ 0.000] fixed : 0xffffffbffabfd000 - 0xffffffbffac00000 ( 12 KB)
[ 0.000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)
[ 0.000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
[ 0.000] memory : 0xffffffc000000000 - 0xffffffc300000000 ( 12288 MB)
[ 0.000] .init : 0xffffffc000bbf000 - 0xffffffc000cb3000 ( 976 KB)
[ 0.000] .text : 0xffffffc000080000 - 0xffffffc000bbeaf4 ( 11515 KB)
[ 0.000] .data : 0xffffffc000cb9000 - 0xffffffc000d9f658 ( 922 KB)
[ 0.000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000] Hierarchical RCU implementation.
[ 0.000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000] NR_IRQS:64 nr_irqs:64 0
[ 0.000] irq_brcmstb_l2: registered L2 intc (mem: 0xffffff8000002000, parent irq: 115)
[ 0.000] irq_brcmstb_l2: registered L2 intc (mem: 0xffffff8000008000, parent irq: 66)
[ 0.000] irq_brcmstb_l2: registered L2 intc (mem: 0xffffff800000a800, parent irq: 67)
[ 0.000] irq_brcmstb_l2: registered L2 intc (mem: 0xffffff800000c640, parent irq: 117)
[ 0.000] irq_brcmstb_l2: registered L2 intc (mem: 0xffffff800000e200, parent irq: 60)
[ 0.000] irq_brcmstb_l2: registered L2 intc (mem: 0xffffff8000010400, parent irq: 122)
[ 0.000] irq_brcmstb_l2: registered L2 intc (mem: 0xffffff8000012380, parent irq: 123)
[ 0.000] irq_brcmstb_l2: registered L2 intc (mem: 0xffffff8000014440, parent irq: 120)
[ 0.000] irq_brcmstb_l2: registered L2 intc (mem: 0xffffff80000163c0, parent irq: 121)
[ 0.000] irq_brcmstb_l2: registered L2 intc (mem: 0xffffff8000018000, parent irq: 126)
[ 0.000] Architected cp15 timer(s) running at 27.00MHz (phys).
[ 0.000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
[ 0.000] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
[ 0.000] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=270000)
[ 0.000] pid_max: default: 32768 minimum: 301
[ 0.000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.000] ftrace: allocating 26572 entries in 104 pages
[ 0.025] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[ 0.027] MCP: Enabling write pairing
[ 0.029] CPU1: Booted secondary processor
[ 0.029] Detected VIPT I-cache on CPU1
[ 0.030] CPU2: Booted secondary processor
[ 0.030] Detected VIPT I-cache on CPU2
[ 0.031] CPU3: Booted secondary processor
[ 0.031] Detected VIPT I-cache on CPU3
[ 0.031] Brought up 4 CPUs
[ 0.031] SMP: Total of 4 processors activated.
[ 0.031] CPU: All CPU(s) started at EL2
[ 0.031] devtmpfs: initialized
[ 0.040] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.040] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.041] NET: Registered protocol family 16
[ 0.065] cpuidle: using governor ladder
[ 0.095] cpuidle: using governor menu
[ 0.095] vdso: 2 pages (1 code @ ffffffc000cc1000, 1 data @ ffffffc000cc0000)
[ 0.095] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.095] cma: cma_alloc(cma ffffffc000defac0, count 64, align 6)
[ 0.095] cma: cma_alloc(): returned ffffffbdcbfc0000
[ 0.095] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.095] Broadcom Brahma-B53 read-ahead cache at: 0xffffff8000112478
[ 0.106] brcmstb-gpio 840a500.gpio: Registered 5 banks (GPIO(s): 0-159)
[ 0.106] brcmstb-gpio 841a400.gpio: Registered 2 banks (GPIO(s): 160-223)
[ 0.107] vgaarb: loaded
[ 0.107] SCSI subsystem initialized
[ 0.107] libata version 3.00 loaded.
[ 0.107] usbcore: registered new interface driver usbfs
[ 0.107] usbcore: registered new interface driver hub
[ 0.107] usbcore: registered new device driver usb
[ 0.107] Linux video capture interface: v2.00
[ 0.108] Advanced Linux Sound Architecture Driver Initialized.
[ 0.108] Bluetooth: Core ver 2.21
[ 0.108] NET: Registered protocol family 31
[ 0.108] Bluetooth: HCI device and connection manager initialized
[ 0.108] Bluetooth: HCI socket layer initialized
[ 0.108] Bluetooth: L2CAP socket layer initialized
[ 0.108] Bluetooth: SCO socket layer initialized
[ 0.108] nfc: nfc_init: NFC Core ver 0.1
[ 0.109] NET: Registered protocol family 39
[ 0.109] Switched to clocksource arch_sys_counter
[ 0.123] NET: Registered protocol family 2
[ 0.124] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.124] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.124] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.124] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.124] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.124] NET: Registered protocol family 1
[ 0.125] RPC: Registered named UNIX socket transport module.
[ 0.125] RPC: Registered udp transport module.
[ 0.125] RPC: Registered tcp transport module.
[ 0.125] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.125] PCI: CLS 0 bytes, default 64
[ 0.193] hw perfevents: Failed to parse /pmu/interrupt-affinity[0]
[ 0.198] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.199] ntfs: driver 2.1.32 [Flags: R/O].
[ 0.199] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.199] fuse init (API version 7.23)
[ 0.200] io scheduler noop registered
[ 0.200] io scheduler deadline registered (default)
[ 0.200] brcm-gisb-arb 83fc000.gisb-arb: registered mem: ffffff8000284000, irqs: 4, 256
[ 0.200] brcmstb-sata-phy 8b08100.sata_phy: registered 1 port(s)
[ 0.201] gpio-brightsign-synthetic3 external_gpio: 0 I=40 O=40 OE=47
[ 0.201] gpio-brightsign-synthetic3 external_gpio: 1 I=71 O=71 OE=48
[ 0.201] gpio-brightsign-synthetic3 external_gpio: 2 I=42 O=42 OE=52
[ 0.201] gpio-brightsign-synthetic3 external_gpio: 3 I=75 O=75 OE=54
[ 0.201] gpio-brightsign-synthetic3 external_gpio: 4 I=38 O=38 OE=55
[ 0.201] gpio-brightsign-synthetic3 external_gpio: 5 I=39 O=39 OE=56
[ 0.201] gpio-brightsign-synthetic3 external_gpio: 6 I=41 O=41 OE=57
[ 0.201] gpio-brightsign-synthetic3 external_gpio: 7 I=43 O=43 OE=58
[ 0.201] brcm-pci 8b10000.pcie: fixing incorrect interrupt-map in DT node
[ 0.201] PCI host bridge /pcie@8b10000 ranges:
[ 0.201] MEM 0x30000000..0x33ffffff -> 0xf0000000
[ 0.201] MEM 0x34000000..0x37ffffff -> 0xf4000000
[ 0.302] brcm-pci 8b10000.pcie: link down
[ 0.303] brcm-pci 8b10000.pcie: PCI host bridge to bus 0000:00
[ 0.303] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.303] pci_bus 0000:00: root bus resource [mem 0x30000000-0x33ffffff] (bus address [0xf0000000-0xf3ffffff])
[ 0.303] pci_bus 0000:00: root bus resource [mem 0x34000000-0x37ffffff pref] (bus address [0xf4000000-0xf7ffffff])
[ 0.303] brcm-pci 8b20000.pcie: fixing incorrect interrupt-map in DT node
[ 0.303] PCI host bridge /pcie@8b20000 ranges:
[ 0.303] MEM 0x38000000..0x3bffffff -> 0xf8000000
[ 0.303] MEM 0x3c000000..0x3fefffff -> 0xfc000000
[ 0.403] brcm-pci 8b20000.pcie: link down
[ 0.403] brcm-pci 8b20000.pcie: PCI host bridge to bus 0001:00
[ 0.403] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.403] pci_bus 0001:00: root bus resource [mem 0x38000000-0x3bffffff] (bus address [0xf8000000-0xfbffffff])
[ 0.403] pci_bus 0001:00: root bus resource [mem 0x3c000000-0x3fefffff pref] (bus address [0xfc000000-0xffefffff])
[ 0.405] console [nullcon0] enabled
[ 0.405] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.406] bcm7271-uart 840c000.serial: BAUD MUX clock not specified
[ 0.406] console [ttyS0] disabled
[ 0.406] 840c000.serial: ttyS0 at MMIO 0x840c000 (irq = 128, base_baud = 5062500) is a 16550A
[ 0.406] bcm7271-uart 840d000.serial: BAUD MUX clock not specified
[ 0.406] 840d000.serial: ttyS1 at MMIO 0x840d000 (irq = 129, base_baud = 5062500) is a 16550A
[ 0.406] bcm7271-uart 840e000.serial: BAUD MUX clock not specified
[ 0.406] 840e000.serial: ttyS2 at MMIO 0x840e000 (irq = 130, base_baud = 5062500) is a 16550A
[ 0.410] brd: module loaded
[ 0.412] loop: module loaded
[ 0.413] brcmstb_nand 84a2800.nand: prefetch enabled
[ 0.413] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 0.413] cma: cma_alloc(): returned ffffffbdcbfc1000
[ 0.413] brcmstb_nand 84a2800.nand: enabling FLASH_DMA
[ 0.413] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xdc
[ 0.413] nand: Unknown NAND 512MiB 3,3V 8-bit
[ 0.413] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.413] brcmstb_nand 84a2800.nand: detected 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
[ 0.414] Bad block table found at page 262080, version 0x01
[ 0.414] Bad block table found at page 262016, version 0x01
[ 0.414] 7 ofpart partitions found on MTD device brcmnand.0
[ 0.414] Creating 7 MTD partitions on "brcmnand.0":
[ 0.414] 0x000000000000-0x000000500000 : "flash0.bolt"
[ 0.414] 0x000000500000-0x000000600000 : "flash0.nvram"
[ 0.415] 0x000000600000-0x000001a00000 : "flash0.rescue"
[ 0.415] 0x000001a00000-0x000002b80000 : "flash0.kernel"
[ 0.415] 0x000002b80000-0x000002e00000 : "flash0.devid"
[ 0.415] 0x000002e00000-0x000020000000 : "flash0.ubi"
[ 0.416] 0x000000000000-0x000020000000 : "flash0"
[ 0.417] libphy: Fixed MDIO Bus: probed
[ 0.419] libphy: unimac MII bus: probed
[ 0.423] Broadcom BCM7278 8f805c0.mdio--1:05: failed to request GPHY clock
[ 0.427] unimac-mdio 8f805c0.mdio: Broadcom UniMAC MDIO bus at 0xffffff80003cc5c0
[ 0.427] brcm-systemport 9300000.ethernet: Broadcom SYSTEMPORT Litev 1.00 at 0xffffff80003d0000 (irqs: 92, 0, TXQs: 16, RXQs: 1)
[ 0.428] PPP generic driver version 2.4.2
[ 0.428] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 0.428] usbcore: registered new interface driver pegasus
[ 0.428] usbcore: registered new interface driver asix
[ 0.428] usbcore: registered new interface driver ax88179_178a
[ 0.428] usbcore: registered new interface driver cdc_ether
[ 0.428] usbcore: registered new interface driver net1080
[ 0.428] usbcore: registered new interface driver cdc_subset
[ 0.428] usbcore: registered new interface driver zaurus
[ 0.428] usbcore: registered new interface driver cdc_ncm
[ 0.429] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.429] ehci-pci: EHCI PCI platform driver
[ 0.429] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.429] ohci-pci: OHCI PCI platform driver
[ 0.429] usbcore: registered new interface driver cdc_acm
[ 0.429] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.429] usbcore: registered new interface driver usblp
[ 0.429] usbcore: registered new interface driver usb-storage
[ 0.429] usbcore: registered new interface driver usbserial
[ 0.429] usbcore: registered new interface driver ch341
[ 0.429] usbserial: USB Serial support registered for ch341-uart
[ 0.429] usbcore: registered new interface driver cp210x
[ 0.429] usbserial: USB Serial support registered for cp210x
[ 0.429] usbcore: registered new interface driver ftdi_sio
[ 0.429] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 0.429] usbcore: registered new interface driver option
[ 0.429] usbserial: USB Serial support registered for GSM modem (1-port)
[ 0.429] usbcore: registered new interface driver pl2303
[ 0.429] usbserial: USB Serial support registered for pl2303
[ 0.429] usbcore: registered new interface driver sierra
[ 0.429] usbserial: USB Serial support registered for Sierra USB modem
[ 0.429] mousedev: PS/2 mouse device common for all mice
[ 0.430] input: buttons as /devices/platform/buttons/input/input0
[ 0.430] input_polldev: Start poll ffffffc0005607d8
[ 0.430] elo_mt_input: loaded
[ 0.430] usbcore: registered new interface driver usbtouchscreen
[ 0.430] i2c /dev entries driver
[ 0.430] brcmstb-i2c 841a300.i2c: iicc@390000hz registered in interrupt mode
[ 0.430] lirc_dev: IR Remote Control driver registered, major 251
[ 0.430] IR Sharp protocol handler initialized
[ 0.430] IR LIRC bridge handler initialized
[ 0.430] IR XMP protocol handler initialized
[ 0.430] usbcore: registered new interface driver streamzap
[ 0.430] usbcore: registered new interface driver uvcvideo
[ 0.430] USB Video Class driver (1.1.1)
[ 0.430] gspca_main: v2.14.0 registered
[ 0.431] usbcore: registered new interface driver gspca_zc3xx
[ 0.431] usbcore: registered new interface driver Philips webcam
[ 0.431] cpia2: V4L-Driver for Vision CPiA2 based cameras v3.0.1
[ 0.431] usbcore: registered new interface driver cpia2
[ 0.431] bcm7038-wdt 840a628.watchdog: Registered Broadcom Watchdog
[ 0.431] sdhci: Secure Digital Host Controller Interface driver
[ 0.431] sdhci: Copyright(c) Pierre Ossman
[ 0.431] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.431] SDHC iomem->start=84a0100 cfg_base=ffffff80003d6100
[ 0.431] mmc0: Enabling slow voltage stabilisation quirk
[ 0.432] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 0.432] cma: cma_alloc(): returned ffffffbdcbfc1040
[ 0.432] sdhci-brcmstb 84a0000.sdhci: No vmmc regulator found
[ 0.432] sdhci-brcmstb 84a0000.sdhci: No vqmmc regulator found
[ 0.489] mmc0: SDHCI controller on 84a0000.sdhci [84a0000.sdhci] using ADMA 64-bit
[ 0.489] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.489] usbcore: registered new interface driver usbhid
[ 0.489] usbhid: USB HID core driver
[ 0.489] usbcore: registered new interface driver snd-usb-audio
[ 0.489] u32 classifier
[ 0.490] Actions configured
[ 0.490] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 0.491] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.491] NET: Registered protocol family 10
[ 0.493] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 0.494] NET: Registered protocol family 17
[ 0.494] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 0.494] Bridge firewalling registered
[ 0.494] Distributed Switch Architecture driver version 0.1
[ 0.494] brcm-systemport 9300000.ethernet eth0: [0]: detected a Broadcom Starfighter 2 switch
[ 0.494] brcm-systemport 9300000.ethernet eth0: eth0: now known as peth0
[ 0.494] brcm-systemport 9300000.ethernet peth0: renamed from eth0
[ 0.539] bcm_sf2_sw_setup: failed to request divider clock
[ 0.539] Starfighter 2 top: 4.08, core: 5.00 base: 0xffffff8000400000, IRQs: 90, 91
[ 0.539] libphy: dsa slave smi: probed
[ 0.619] 8f805c0.mdio--1:05: Broadcom BCM7278 PHY revision: 0x01, patch: 0
[ 0.700] mmc0: new SD card at address aaaa
[ 0.701] mmcblk0: mmc0:aaaa SU02G 1.84 GiB
[ 0.702] mmcblk0: p1
[ 0.855] dsa 8f00000.ethernet_switch eth0 (uninitialized): attached PHY at address 5 [Broadcom BCM7278]
[ 0.855] 8021q: 802.1Q VLAN Support v1.8
[ 0.855] Key type dns_resolver registered
[ 0.858] ALSA device list:
[ 0.858] No soundcards found.
[ 0.858] Warning: unable to open an initial console.
[ 0.859] Freeing unused kernel memory: 976K
[ 0.859] Freeing alternatives memory: 16K
[ 0.859] kmsg output is not also going to console.
[ 0.859] initramfs started...
[ 0.860] ubi0: attaching mtd5
[ 1.039] random: nonblocking pool is initialized
[ 1.719] ubi0: scanning is finished
[ 1.724] ubi0: attached mtd5 (name "flash0.ubi", size 466 MiB)
[ 1.724] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.724] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.724] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.724] ubi0: good PEBs: 3724, bad PEBs: 4, corrupted PEBs: 0
[ 1.724] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[ 1.724] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 3226785837
[ 1.724] ubi0: available PEBs: 2632, total reserved PEBs: 1092, PEBs reserved for bad PEB handling: 76
[ 1.724] ubi0: background thread "ubi_bgt0d" started, PID 896
[ 1.726] block ubiblock0_1: created from ubi0:1(rootfs)
[ 1.726] Verifying rootfs...
[ 8.957] Mounting rootfs from /dev/ubiblock0_1
[ 9.186] UBI volume is 3724 blocks
[ 9.519] UBIFS error (pid: 1116): cannot open "ubi0:writable", error -19mount: mounting ubi0:writable on /var/lib/brightsign failed: No such device
[ 9.520] Failed to mount writable UBI
[ 9.522] Creating new writable UBI of 16MiB
[ 9.539] Volume ID 0, size 133 LEBs (16887808 bytes, 16.1 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "writable", alignment 1
[ 9.539] Mounting new writable UBI
[ 9.547] UBIFS (ubi0:0): default file-system created
[ 9.548] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 1129
[ 9.570] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "writable"
[ 9.570] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 9.570] UBIFS (ubi0:0): FS size: 15618048 bytes (14 MiB, 123 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[ 9.570] UBIFS (ubi0:0): reserved for root: 737678 bytes (720 KiB)
[ 9.570] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID AD8350AD-14CF-468F-B803-8B0A13E78D9B, small LPT model
[ 9.610] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 9.610] cma: cma_alloc(): returned ffffffbdcbfc1080
[ 9.610] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 9.610] cma: cma_alloc(): returned ffffffbdcbfc10c0
[ 9.610] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 9.610] cma: cma_alloc(): returned ffffffbdcbfc1100
[ 9.610] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 9.610] cma: cma_alloc(): returned ffffffbdcbfc1140
[ 9.610] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 9.610] cma: cma_alloc(): returned ffffffbdcbfc1180
[ 9.610] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 9.610] cma: cma_alloc(): returned ffffffbdcbfc11c0
[ 9.610] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 9.610] cma: cma_alloc(): returned ffffffbdcbfc1200
[ 9.610] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 9.610] cma: cma_alloc(): returned ffffffbdcbfc1240
[ 9.610] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 9.610] cma: cma_alloc(): returned ffffffbdcbfc1280
[ 9.610] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 9.610] cma: cma_alloc(): returned ffffffbdcbfc12c0
[ 9.610] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 9.610] cma: cma_alloc(): returned ffffffbdcbfc1300
[ 9.610] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 9.610] cma: cma_alloc(): returned ffffffbdcbfc1340
[ 9.610] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 9.610] cma: cma_alloc(): returned ffffffbdcbfc1380
[ 9.610] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 9.610] cma: cma_alloc(): returned ffffffbdcbfc13c0
[ 9.610] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 9.610] cma: cma_alloc(): returned ffffffbdcbfc1400
[ 9.610] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 9.610] cma: cma_alloc(): returned ffffffbdcbfc1440
[ 9.610] IPv6: ADDRCONF(NETDEV_UP): peth0: link is not ready
[ 9.611] Using user-space nexus
[ 9.616] bcmdriver: loading out-of-tree module taints kernel.
[ 9.616] bcmdriver: module license 'Proprietary' taints kernel.
[ 9.616] Disabling lock debugging due to kernel taint
[ 9.616] BCMDRV: Initializing bcmdriver version $ 9
[ 9.616] BCMDRV: virtual irq: enabled (11)
[ 9.617] BCMDRV: shared gpio banks: enabled
[ 9.617] BCMDRV: Total intc words=4,Total Irqs=129
[ 9.617] BCMDRV: Initialization complete
[ 9.714] BRIGHTSIGN boot=7.1.42 firstimages=7.1.42 rescue=7.1.42 mission=7.1.42 model=XT244 REVE serial=D5E86U003208 hw=2114f19 sk=1 sb=1
[ 9.715] AVS Revision=1.4.0.0 V0=0.893V T0=41.868C PV0=0.833V MV0=0.892V
[ 9.760] RTC not set
[ 9.760] RTC was not set.
[ 9.763] Looking for crash dump:
[ 9.859] Reset causes: 0x80 reboot
[ 9.859] No post-mortem crash dump available.
[ 9.889] usbmount-1170: mount mmcblk0 /devices/platform/rdb/84a0000.sdhci/mmc_host/mmc0/mmc0:aaaa/block/mmcblk0
[ 9.890] usbmount-1170: path='/sys/devices/platform/rdb/84a0000.sdhci/mmc_host/mmc0/mmc0:aaaa'
[ 9.893] mmcblk0: p1
[ 9.896]
[ 9.896] Disk /dev/mmcblk0: 1977 MB, 1977614336 bytes
[ 9.896] 62 heads, 61 sectors/track, 1021 cylinders, total 3862528 sectors
[ 9.896] Units = sectors of 1 * 512 = 512 bytes
[ 9.896]
[ 9.896] Device Boot Start End Blocks Id System
[ 9.896] /dev/mmcblk0p1 8199 3862527 1927164+ 6 FAT16
[ 9.896] Partition 1 has different physical/logical beginnings (non-Linux?):
[ 9.896] phys=(2, 2, 10) logical=(2, 10, 26)
[ 9.896] Partition 1 has different physical/logical endings:
[ 9.896] phys=(957, 61, 61) logical=(1021, 18, 8)
[ 9.898] usbmount-1170: Considering /dev/mmcblk0p4...
[ 9.900] usbmount-1170: Considering /dev/mmcblk0p3...
[ 9.901] usbmount-1170: Considering /dev/mmcblk0p2...
[ 9.902] usbmount-1170: Considering /dev/mmcblk0p1...
[ 9.903] usbmount-1170: /dev/mmcblk0p1 is a valid block device
[ 9.930] Starting system message bus: dbus.
[ 10.057] ID_FS_UUID=C7FE-49A0
[ 10.057] ID_FS_UUID_ENC=C7FE-49A0
[ 10.057] ID_FS_TYPE=vfat
[ 10.059] usbmount-1170: Filesystem on /dev/mmcblk0p1
[ 10.136] usbmount-1170: ID_FS_TYPE=vfat
[ 10.143] usbmount-1170: device_size=3854329
[ 10.144] usbmount-1170: fsck_timeout=47
[ 10.313] Spawning a session daemon
[ 10.313] Session bs created.
[ 10.313] Traces will be written in /var/volatile/lttng/lttng-traces/bs-20000101-000000
[ 10.446] UST channel channel0 enabled for session bs
[ 10.452] UST channel channel_high_freq enabled for session bs
[ 10.472] Starting dhcpcd eth0
[ 10.543] fsck.fat 3.0.25 (2014-01-17)
[ 10.543] /dev/mmcblk0p1: 1 files, 2/480847 clusters
[ 10.544] timely: /sbin/dosfsck exited with 0 after 0s
[ 10.545] usbmount-1170: fsck.vfat /dev/mmcblk0p1 succeeded
[ 10.556] usbmount-1170: Successfully mounted /dev/mmcblk0p1 at /storage/sd.fwup
[ 10.557] usbmount-1170: Cleaned up fsck cruft at /storage/sd.fwup
[ 10.557] usbmount-1170: Looking for firmware update at /storage/sd.fwup
[ 10.637] No appropriate upgrade files found.
[ 10.638] usbmount-1170: Migrating mounted filesystem from /storage/sd.fwup to /storage/sd
[ 10.828] net-configure: eth0 start
[ 10.883] dhcpcd[1334]: dhcpcd not running
[ 10.909] dhcpcd[1338]: eth0: adding address fe80::92ac:3fff:fe10:7b87
[ 10.910] dhcpcd[1338]: forked to background, child pid 1340
[ 10.917] No inbound bandwidth shaping on eth0
[ 10.919] IP:eth0 NOCARRIER down
[ 10.944] net-configure: eth0 update
[ 11.153] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.153] dhcpcd[1340]: eth0: waiting for carrier
[ 11.278] Power source: PSU (PoE on standby)
[ 11.288] brcmstb-usb-phy 8b38200.usb-phy: USB3.0 clock not found in Device Tree
[ 11.290] xhci-brcm: xHCI BRCM driver
[ 11.369] xhci-brcm 8b39000.xhci_v2: xHCI Host Controller
[ 11.369] xhci-brcm 8b39000.xhci_v2: new USB bus registered, assigned bus number 1
[ 11.369] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 11.369] cma: cma_alloc(): returned ffffffbdcbfc1480
[ 11.370] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 11.370] cma: cma_alloc(): returned ffffffbdcbfc14c0
[ 11.370] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 11.370] cma: cma_alloc(): returned ffffffbdcbfc1500
[ 11.370] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 11.370] cma: cma_alloc(): returned ffffffbdcbfc1540
[ 11.370] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 11.370] cma: cma_alloc(): returned ffffffbdcbfc1580
[ 11.370] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 11.370] cma: cma_alloc(): returned ffffffbdcbfc15c0
[ 11.370] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 11.370] cma: cma_alloc(): returned ffffffbdcbfc1600
[ 11.370] cma: cma_alloc(cma ffffffc000defac0, count 1, align 0)
[ 11.370] cma: cma_alloc(): returned ffffffbdcbfc1640
[ 11.370] xhci-brcm 8b39000.xhci_v2: hcc params 0x0250f16d hci version 0x100 quirks 0x00010090
[ 11.370] xhci-brcm 8b39000.xhci_v2: irq 145, io mem 0x08b39000
[ 11.370] hub 1-0:1.0: USB hub found
[ 11.370] hub 1-0:1.0: 2 ports detected
[ 11.370] xhci-brcm 8b39000.xhci_v2: xHCI Host Controller
[ 11.371] xhci-brcm 8b39000.xhci_v2: new USB bus registered, assigned bus number 2
[ 11.371] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 11.371] hub 2-0:1.0: USB hub found
[ 11.371] hub 2-0:1.0: 2 ports detected
[ 11.371] xhci-brcm 8b39000.xhci: USB Phy not found.
[ 11.376] USB vidpid=1d6b:0003
[ 11.376] USB vidpid=1d6b:0002
[ 11.609] brcm-systemport 9300000.ethernet peth0: Link is Up - 1Gbps/Full - flow control off
[ 11.609] IPv6: ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready
[ 12.405] usbcore: registered new interface driver btusb
[ 12.454] WiFi not found
[ 12.493] net.ipv4.conf.eth0.force_igmp_version = 0
[ 12.871] dsa 8f00000.ethernet_switch eth0: Link is Down
[ 13.070] Panda firmware version 01.01 available for upgrades
[ 13.147] No Pandas found
[ 13.153] Starting extensions message bus: dbus.
[ 13.158] Skipping non-extension UBI writable
[ 13.159] Skipping non-extension UBI rootfs
[ 13.160] Skipping non-extension UBI indiv0
[ 13.160] Skipping non-extension UBI indiv1
[ 13.253] Feature 'EAC3' not set
[ 13.270] Feature 'AC3' not set
[ 13.321] share-terminal: serial console only
[ 13.474] bluetoothd[1531]: Bluetooth daemon 5.43
[ 13.504] bluetoothd[1531]: Starting SDP server
[ 13.510] bluetoothd[1531]: kernel lacks bnep-protocol support
[ 13.510] bluetoothd[1531]: System does not support network plugin
[ 13.512] bluetoothd[1531]: Failed to open RFKILL control device
[ 13.513] bluetoothd[1531]: Bluetooth management interface 1.10 initialized
[ 13.799] Starting BrightSign application...
[ 13.858] Starting brightsign tracing: default
[ 14.893] dsa 8f00000.ethernet_switch eth0: Link is Up - 1Gbps/Full - flow control off
[ 14.893] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 14.893] dhcpcd[1340]: eth0: carrier acquired
[ 17.909] net-configure: eth0 update
[ 17.923] dhcpcd[1340]: DUID 00:03:00:01:90:ac:3f:10:7b:87
[ 17.923] dhcpcd[1340]: eth0: IAID 3f:10:7b:87
[ 18.579] dhcpcd[1340]: eth0: soliciting a DHCP lease
[ 18.581] dhcpcd[1340]: eth0: offered 10.7.80.23 from 10.7.32.61
[ 18.583] dhcpcd[1340]: eth0: probing address 10.7.80.23/18
[ 18.732] dhcpcd[1340]: eth0: soliciting an IPv6 router
[ 21.204] BrightSign application malibu-7.1.42 starting
[ 21.310] NEXUS_BOX_MODE 2 videomode auto parsed 0
[ 21.680] 00:00:00.312 nexus_platform_cma: reserved region:2 MEMC0 'BFW' 0x047000000...0x047040000
[ 21.680] 00:00:00.312 nexus_platform_cma: current Linux boot parameters: 'bmem=1312m@1760m bmem=664m@3432m'
[ 21.723] *** 00:00:00.354 nexus_platform_settings: NEXUS_P_GetMemoryConfiguration: display: 0 primary_displays: 0x00000009 maxformat: 1
[ 21.723]
[ 21.723] *** 00:00:00.354 nexus_platform_settings: NEXUS_P_GetMemoryConfiguration: display: 1 primary_displays: 0x00000009 maxformat: 0
[ 21.723]
[ 21.723] *** 00:00:00.354 nexus_platform_settings: NEXUS_P_GetMemoryConfiguration: display: 2 primary_displays: 0x00000009 maxformat: 0
[ 21.723]
[ 21.723] *** 00:00:00.354 nexus_platform_settings: NEXUS_P_GetMemoryConfiguration: display: 3 primary_displays: 0x00000009 maxformat: 8
[ 21.723]
[ 21.723] *** 00:00:00.354 nexus_platform_settings: NEXUS_P_GetMemoryConfiguration: display: 4 primary_displays: 0x00000009 maxformat: 0
[ 21.723]
[ 21.723] *** 00:00:00.354 nexus_platform_settings: NEXUS_P_GetMemoryConfiguration: display: 5 primary_displays: 0x00000009 maxformat: 0
[ 21.723]
[ 21.723] *** 00:00:00.354 nexus_platform_settings: NEXUS_P_GetMemoryConfiguration: display: 6 primary_displays: 0x00000009 maxformat: 0
[ 21.723]
[ 21.725] Maximum audio sample rate supported: 192000Hz
[ 21.745] *** 00:00:00.019 nexus_platform_os: virtual l2 enabled
[ 21.745] *** 00:00:00.019 nexus_platform_os: shared gpio enabled
[ 21.745] *** 00:00:00.020 nexus_platform_cma: MEMC0 Placed HEAP[2] 32MBytes(0x2000000 Bytes) with alignment 0x200000 SAGE at 0x0be000000 (3040 MByte)
[ 21.745] *** 00:00:00.020 nexus_platform_cma: MEMC0 Placed HEAP[1] 108MBytes(0x6c00000 Bytes) with alignment 0x200000 SAGE at 0x0b7400000 (2932 MByte)
[ 21.745] *** 00:00:00.020 nexus_platform_cma: MEMC0 Placed HEAP[0] 144MBytes(0x9000000 Bytes) with alignment 0x100000 SAGE at 0x0ae400000 (2788 MByte)
[ 21.745] *** 00:00:00.020 nexus_platform_cma: MEMC0 Placed HEAP[19] 3MBytes(0x396000 Bytes) with alignment 0 at 0x0ae06a000 (2784 MByte)
[ 21.745] *** 00:00:00.020 nexus_platform_cma: MEMC0 Placed HEAP[4] 768MBytes(0x30000000 Bytes) with alignment 0 at 0x07e06a000 (2016 MByte)
[ 21.745] *** 00:00:00.020 nexus_platform_cma: MEMC0 Placed HEAP[3] 254MBytes(0xfeb8000 Bytes) with alignment 0 at 0x06e1b2000 (1761 MByte)
[ 21.745] *** 00:00:00.020 nexus_platform_cma: truncating MEMC1.0 664MBytes(0x29800000) at 0x0d6800000
[ 21.745] *** 00:00:00.020 nexus_platform_cma: MEMC1 Placed HEAP[8] 5MBytes(0x500000 Bytes) with alignment 0 at 0x0ffaff000 (4090 MByte)
[ 21.745] *** 00:00:00.020 nexus_platform_cma: MEMC1 Placed HEAP[6] 658MBytes(0x2923c000 Bytes) with alignment 0 at 0x0d68c3000 (3432 MByte)
[ 21.785] *** 00:00:00.060 BCHP_PWR: BCHP_PWR POWER MANAGEMENT ENABLED
[ 21.788] *** 00:00:00.063 nexus_platform: malibu B1 18.1, boxmode 2, pmap 2, product 7278 B1
[ 21.788] 00:00:00.063 nexus_platform: NEXUS_SCM_ID_STRING:8dd2b40874663ccf5d0b6be673859cad817af350
[ 21.789] 00:00:00.063 nexus_environment: NEXUS_BOX_MODE='2', SAGEBIN_PATH='/lib/firmware'
[ 21.789] *** 00:00:00.063 nexus_platform_malibu: Initializing unknown platform in 64 bit mode
[ 21.789] 00:00:00.064 BHSMa: SECURITY VERSION: Zeus[5.1.0] BFW[2.1.3]
[ 21.789] 00:00:00.064 BHSM: KeySlot types: IvPerSlot128[21+3] IvPerBlock128[21] IvPerBlock256[11] IvPerEntry256[11]
[ 21.790] 00:00:00.065 BHSM: Bypass Keyslot initialised. Type[0] Number[0] [G->G]
[ 21.791] 00:00:00.066 BHSM: Bypass Keyslot initialised. Type[0] Number[1] [G->G]
[ 21.792] 00:00:00.066 BHSM: Bypass Keyslot initialised. Type[0] Number[2] [G->G]
[ 21.822] 00:00:00.097 BSAGElib: BSAGElib_P_GetChipsetType - Chip Type: ZB
[ 22.336] 00:00:00.611 BSAGElib: SAGE Bootloader Version [RELEASE=4.0.4.0, Signing Tool=4.0.2.0]
[ 22.336] 00:00:00.611 BSAGElib: SAGE Framework Version [RELEASE=4.0.1.0, Signing Tool=4.0.0.0]
[ 22.353] 00:00:00.627 BSAGElib: [BSAGElib_P_Boot_ResetSage] SAGE BL region status = 0x000005C3
[ 22.354] 00:00:00.629 BSAGElib: LEAVING ----------------- [BSAGElib_P_Boot_ResetSage]
[ 22.354] 00:00:00.629 BSAGElib: BSAGElib_P_Boot_Framework:506 BSAGElib_P_Boot_SetBootParam(SageVklMask,0x00000003)
[ 23.463] dhcpcd[1340]: eth0: leased 10.7.80.23 for 259200 seconds
[ 23.463] dhcpcd[1340]: eth0: adding route to 10.7.64.0/18
[ 23.463] dhcpcd[1340]: eth0: adding default route via 10.7.64.1
[ 23.465] IP:eth0 BOUND ip=10.7.80.23 nm=255.255.192.0 gw=10.7.64.1 domain=infor.com dns=10.7.129.78 10.7.129.79 10.21.203.56
[ 23.497] net-configure: eth0 update
[ 23.603] save-crash-dump: Child died early
[ 23.604] crash-dump caught exception: save-crash-dump: Child died early
[ 24.015] 00:00:02.290 BSAGElib: BSAGElib_Boot_Post TBD BHSM_API_VERSION=2 post boot actions
[ 24.022] 00:00:02.297 BSAGElib: SAGE TA: ANTIROLLBACK [Version=4.0.1.0, Signing Tool=4.0.0.0]
[ 24.094] 00:00:02.369 nexus_sage_ar: NEXUS_Sage_P_ARInit - Skipping AR Database load, file does not exist...
[ 24.111] 00:00:02.386 nexus_sage_ar: Sage AR TA running with Builtin database version 6
[ 24.136] 00:00:02.411 BSAGElib: SAGE TA: SECURE_VIDEO [Version=4.0.1.0, Signing Tool=4.0.0.0]
[ 24.246] 00:00:02.521 BSAGElib: SAGE TA: BP3 [Version=4.0.13.40, Signing Tool=4.0.0.0]
[ 24.388] 00:00:02.663 nexus_sage_bp3: bond option 0
[ 24.388] 00:00:02.663 nexus_sage_bp3: Sage BP3 TA running
[ 24.610] 00:00:02.885 nexus_sage_bp3: Processed bp3.bin rc=0
[ 24.610] 00:00:02.885 nexus_sage_bp3: 1 enabled Feature List:
[ 24.610] 00:00:02.885 nexus_sage_bp3: Audio Feature List 0x00000000
[ 24.610] 00:00:02.885 nexus_sage_bp3: Video 0 Feature List 0x801F6E7B
[ 24.610] 00:00:02.885 nexus_sage_bp3: Video 1 Feature List 0x00000007
[ 24.610] 00:00:02.885 nexus_sage_bp3: Host Feature List 0x00000002
[ 24.610] 00:00:02.885 nexus_sage_bp3: SAGE Feature List 0x00000001
[ 24.641] 00:00:02.916 nexus_hdmi_input_hdcp: NEXUS_HdmiInput_LoadHdcpTA_priv: allocate 74028 bytes for HDCP_TA buffer
[ 24.642] *** 00:00:02.916 nexus_audio_module: WARNING: Failed to open Audio FW image interface.
[ 24.642] *** 00:00:02.917 bdsp_raaga_img: DDP decoding is not supported
[ 24.859] *** 00:00:03.134 nexus_decoder_security: TO BE supported ARCH deviceId [1] ARCH[2]
[ 24.932] *** 00:00:03.207 BXVD_PRIV: BXVD_P_OpenPartTwo() - Hardware revision: T, Firmware revision: 21a0701
[ 24.939] *** 00:00:03.214 BXVD_PRIV: BXVD_P_OpenPartTwo() - Hardware revision: T, Firmware revision: 21a0701
[ 25.305] *** 00:00:03.580 BVCE: FW v4.20.0.0 (0x04140000) [API v8.0.0.0 (0x08000000)][0]
[ 25.312] !!!Error BERR_INVALID_PARAMETER(0x2) at magnum/basemodules/int/bint.c:912
[ 25.313] !!!Error BERR_INVALID_PARAMETER(0x2) at magnum/portinginterface/i2c/src/bi2c.c:2663
[ 25.313] ### 00:00:03.587 nexus_i2c: Unable to open I2C Device Channel
[ 25.313] !!!Error BERR_INVALID_PARAMETER(0x2) at nexus/modules/i2c/src/nexus_i2c.c:236
[ 25.313] !!!Error BERR_INVALID_PARAMETER(0x2) at nexus/modules/i2c/src/nexus_i2c.c:346
[ 25.313] *** 00:00:03.588 b_objdb_class: Class:'NEXUS_AudioOutput' count:9 live:9
[ 25.317] 00:00:03.592 BHDM_EDID: Initializing/Reading EDID Information (BHDM URSR 18.1 7278)
[ 25.345] *** 00:00:03.620 BHDM_EDID: Attached HDMI device 'DELL P2319H' does not support audio
[ 25.359] *** 00:00:03.634 nexus_platform: initialized
[ 25.359] *** 00:00:03.634 nexus_statistics_module: platform[High] nexus/base/src/nexus_base_scheduler.c:948 3114582 usec
[ 25.359] *** 00:00:03.634 nexus_statistics_callback: Timer callback 0x10c8430:0x7fa8e5a828 from common/src/linuxuser/nexus_platform_os.c:753 3114627 usec
[ 25.359] Maximum audio sample rate supported: 192000Hz
[ 25.360] ### 00:00:03.634 nexus_timebase: NEXUS_Timebase_P_SetSettings: Unknown sample rate 0, assuming 48000
[ 25.360]
[ 25.381] !!!Error BHDM_EDID_AUDIO_FORMATS_UNAVAILABLE(0x300db) at magnum/portinginterface/hdm/src/common/bhdm_edid.c:3312
[ 25.409] !!!Error BHDM_EDID_AUDIO_FORMATS_UNAVAILABLE(0x300db) at magnum/portinginterface/hdm/src/common/bhdm_edid.c:3312
[ 25.457] Auto mode chosen: 1920x1080x60p (2)
[ 25.482] NetworkTime: server changed to 'time.brightsignnetwork.com'
[ 25.482] NetworkTime: Configuration changed.
[ 25.520] commandline read: brightsign
[ 25.521]
[ 25.521] ~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.4.17 |~~~~~~~~~~~~~~~~~~~~~~~~~~
[ 25.521] (c) 2001-2012 The world wide DirectFB Open Source Community
[ 25.521] (c) 2000-2004 Convergence (integrated media) GmbH
[ 25.521] ----------------------------------------------------------------
[ 25.521]
[ 25.543] (*) DirectFB/Core: Single Application Core. (2018-06-06 11:15) [ DEBUG ]
[ 25.576] (*) Direct/Memcpy: Using Generic 64bit memcpy()
[ 25.578] *** 00:00:00.000 platform_init: Broadcom Corporation DirectFB Platform Layer Version 7.0
[ 25.578] *** 00:00:00.000 nexus_common_init: Display heap: handle=0x10d44e0 size 786432kB - free 785404kB - largest block 785404kB
[ 25.578] *** 00:00:00.000 nexus_common_init: Offscreen heap: handle=0x10d44e0 size 786432kB - free 785404kB - largest block 785404kB
[ 25.620] (*) DirectFB/Graphics: Broadcom Corporation Bcmnexus Packet Buffer GFX Driver 4.3 (Broadcom Corporation)
[ 25.672] SNTP: time.brightsignnetwork.com [184.72.42.7] rtt=133ms
[ 25.672] Setting system clock to 1547817165.743352
[ 25.673] NetworkTime: clock set to 2019/01/18 13:12:45.743 UTC
[ 25.729] (*) Direct/Thread: Started 'BRCM NotifyDisplay' (-1) [OUTPUT OTHER/OTHER 0/0] <1048576>...
[ 25.737] (*) DirectFB/Core/WM: Default 0.3 (directfb.org)
[ 25.876] 166981:12:30.13 BHDM_PWR: Tx0: Not in standby
[ 25.876] !!!Error BHDM_EDID_AUDIO_FORMATS_UNAVAILABLE(0x300db) at magnum/portinginterface/hdm/src/common/bhdm_edid.c:3312
[ 25.877] *** 166981:12:30.13 BHDM_EDID: Not UHD - using colorimetry 1
[ 25.877] !!!Error BHDM_EDID_AUDIO_FORMATS_UNAVAILABLE(0x300db) at magnum/portinginterface/hdm/src/common/bhdm_edid.c:3312
[ 25.978] !!!Error BHDM_EDID_AUDIO_FORMATS_UNAVAILABLE(0x300db) at magnum/portinginterface/hdm/src/common/bhdm_edid.c:3312
[ 25.978] !!!Error (0x300db) at nexus/modules/hdmi_output/src/nexus_hdmi_output.c:1474
[ 25.978] !!!Error (0x300db) at nexus/modules/hdmi_output/src/nexus_hdmi_output_format_validation.c:810
[ 26.012] 166981:12:30.26 BHDM: Tx0 Output: 1080p (RGB (Default) 24 bpp) 1920 [+] x 1080/1080 [+], PxlClk: 148MHz (TMDS 148510000 Mcsc)
[ 26.130] *** 166981:12:30.38 nexus_statistics_api: NEXUS_Display_AddOutput[display:High] 253879 usec
[ 26.130] *** 166981:12:30.38 nexus_statistics_module: display[High] nexus/base/src/nexus_base_scheduler.c:1063 118318 usec
[ 26.130] *** 166981:12:30.38 nexus_statistics_callback: Event callback 0x116aba0:0x7fa8fa7df8 from modules/display/src/nexus_display.c:1118 118398 usec
[ 28.108] DRM: Trying to find: /dev/dri/card0
[ 28.108] DRM: Unable to find device - defaulting back to Nexus: No such file or directory
[ 28.138] !!!Error BHDM_EDID_AUDIO_FORMATS_UNAVAILABLE(0x300db) at magnum/portinginterface/hdm/src/common/bhdm_edid.c:3312
[ 28.139] Using /storage/sys/default-4k-edid.bin EDID
[ 28.139] 166981:12:32.39 BHDR_EDID_RAM: HDMI EDID bytes not specified; HDMI Rx will use its default EDID
[ 28.140] 166981:12:32.39 BSAGElib: SAGE TA: HDCP22 [Version=4.0.1.0, Signing Tool=4.0.0.0]
[ 28.246] *** 166981:12:32.49 b_objdb_class: Class:'NEXUS_MemoryBlock' count:13 live:9
[ 28.255] 166981:12:32.50 bhdcplib_hdcp2x: Rx: Process SAGE Response, current state [OpenSAGEPlatform] - next state [InitializeSAGEPlatform]
[ 28.256] 166981:12:32.51 bhdcplib_hdcp2x: Rx: Process SAGE Response, current state [InitializeSAGEPlatform] - next state [InitializeSAGEModule]
[ 28.258] 166981:12:32.51 bhdcplib_hdcp2x: ** Rx: HDCP22_API_VERSION_ID: 0x01010002 **
[ 28.258] 166981:12:32.51 bhdcplib_hdcp2x: Rx: Process SAGE Response, current state [InitializeSAGEModule] - next state [Unauthenticated]
[ 28.261] *** 166981:12:32.51 nexus_statistics_api: NEXUS_HdmiInput_OpenWithEdid[hdmi_input:Low] 121553 usec
[ 28.285] HDCP2.2 TX key is present but CONFIG_HDCP2 is disabled
[ 28.286] HDCP2.2 RX key is present but CONFIG_HDCP2 is disabled
[ 28.286] *** 166981:12:32.53 BHDM_EDID: Not UHD - using colorimetry 1
[ 28.417] *** 166981:12:32.67 BVC5_P: GPU Clock speed: 600 MHz
[ 28.417]
[ 28.427] bs_native_window_create: display 0 graphics width: 1920 height: 1080 compression: 2
[ 28.427] *** 166981:12:32.68 b_objdb_class: Class:'NEXUS_MemoryBlock' count:18 live:14
[ 28.428] bs_native_window_clip_dimensions:850 stretch 0 position 0,0 1920x1080 nw 1920x1080 clip 1920x1080 format 1920x1080
[ 28.470] *** 166981:12:32.72 b_objdb_class: Class:'NEXUS_MemoryBlock' count:26 live:22
[ 28.806] This plugin does not support createPlatformOpenGLContext!
[ 29.146] *** 166981:12:33.40 b_objdb_class: Class:'NEXUS_Surface' count:13 live:9
[ 29.647] *** 166981:12:33.90 b_objdb_class: Class:'NEXUS_MemoryBlock' count:46 live:35
[ 30.734] dhcpcd[1340]: eth0: no IPv6 Routers available
[ 34.918] !!!Error BHDM_EDID_AUDIO_FORMATS_UNAVAILABLE(0x300db) at magnum/portinginterface/hdm/src/common/bhdm_edid.c:3312
[ 34.921] Loading 'SYS:/default-autorun.brs' (68810480e75f99065ebc0df059df0e0cf407bfa6)
[ 35.213] NetworkTime: server changed to 'http://time.brightsignnetwork.com'
[ 35.213] NetworkTime: Configuration changed.
[ 35.230] !!!Error BHDM_EDID_AUDIO_FORMATS_UNAVAILABLE(0x300db) at magnum/portinginterface/hdm/src/common/bhdm_edid.c:3312
[ 35.520] Setting system clock to 1547817175.000000
[ 35.520] NetworkTime: clock set to 2019/01/18 13:12:55.000 UTC
[ 35.621] Installed Qt WebEngine locales directory not found at location /share/qt5/translations/qtwebengine_locales. Trying application directory...
[ 35.621] Qt WebEngine locales directory not found at location /bin/qtwebengine_locales. Trying fallback directory... Translations MAY NOT not be correct.
[ 36.046] [0118/051255:WARNING:resource_bundle.cc(291)] locale_file_path.empty() for locale
[ 36.335] Installed Qt WebEngine locales directory not found at location /share/qt5/translations/qtwebengine_locales. Trying application directory...
[ 36.335] Qt WebEngine locales directory not found at location /lib64/qt5/libexec/qtwebengine_locales. Trying fallback directory... Translations MAY NOT not be correct.
[ 36.339] [0118/051255:WARNING:resource_bundle.cc(291)] locale_file_path.empty() for locale
[ 36.853] GPU worker thread priority: 49 (0)
[ 37.118] BSPLAY: http://localhost:8080
[ 37.119] Remote debugging server started successfully. Try pointing a Chromium-based browser to http://0.0.0.0:2999
[ 37.630] V8::ResourceConstraints::ConfigureDefaults reg flag not set limits low 692060160 medium 1073741824 high 2147483648
[ 37.630] V8::ResourceConstraints::ConfigureDefaults physical 2065186816 swap 0 - [2] - max 16 old 1024 exe 512
[ 39.053] libpng warning: iCCP: known incorrect sRGB profile
[ 39.693] [INFO] [source http://localhost:8080/js/all.js:1089]: stateChangeStart triggered
[ 39.693] [INFO] [source http://localhost:8080/js/all.js:1090]: fromState =
[ 39.693] [INFO] [source http://localhost:8080/js/all.js:1091]: toState = deviceConfig.intro
[ 39.880] libpng warning: iCCP: known incorrect sRGB profile
[ 39.935] [INFO] [source http://localhost:8080/js/all.js:1117]: baseUrl from document is:http://localhost:8080/#/deviceConfig/intro
[ 39.935] [INFO] [source http://localhost:8080/js/all.js:1127]: baseUrl before setting it is: http://localhost:8080/
[ 39.936] [INFO] [source http://localhost:8080/js/all.js:1489]: countdownService initialization
[ 39.995] [INFO] [source http://localhost:8080/js/all.js:1166]: http://localhost:8080/getStaticPowerUpState
[ 42.038] *** 166981:12:45.70 b_objdb_class: Class:'NEXUS_MemoryBlock' count:122 live:56
[ 303.094] + === 2b: kick off the other provisioning methods and start a timeout timer
[ 303.095] + File source: http://brightsign-b-deploy/.
[ 303.095] + File destination: tmp:/wellKnownHost.brs.
[ 303.095] + Attempting download of: wellKnownHost.brs.
[ 303.097] + File source: https://provision.brightsignnetwork.com/rest/.
[ 303.097] + File destination: tmp:/bDeployCloud.brs.
[ 303.105] + Attempting download of: bDeployCloud.brs.
[ 303.107] + File source: http://brightsign-b-deploy.local/.
[ 303.107] + File destination: tmp:/mDns.brs.
[ 303.107] + Attempting download of: mDns.brs.
[ 303.107] + === Started provisioning timeout timer
[ 303.107] + ProcessWellKnownHostResponse: status code = -6
[ 303.107] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 303.107] + === 4. B-Deploy Cloud has not responded.
[ 303.107] + === 5f: mDns has not responded.
[ 303.919] + ProcessBDeployCloudResponse: status code = 204
[ 303.919] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 303.919] + === 4f: B-Deploy Cloud returned status code 204. Proceed with the other methods.
[ 303.919] + === 5f: mDns has not responded.
[ 318.184] + ProcessMDnsResponse: status code = -6
[ 318.184] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 318.184] + === 4f: B-Deploy Cloud returned status code 204. Proceed with the other methods.
[ 318.184] + === 5f: mDns returned an error. Proceed with other methods
[ 333.107] + NoScriptFoundHandler: Provisioning timer fired; no provisioning sources replied
[ 687.889] + === 2b: kick off the other provisioning methods and start a timeout timer
[ 687.890] + File source: http://brightsign-b-deploy/.
[ 687.890] + File destination: tmp:/wellKnownHost.brs.
[ 687.890] + Attempting download of: wellKnownHost.brs.
[ 687.897] + File source: https://provision.brightsignnetwork.com/rest/.
[ 687.897] + File destination: tmp:/bDeployCloud.brs.
[ 687.904] + Attempting download of: bDeployCloud.brs.
[ 687.905] + File source: http://brightsign-b-deploy.local/.
[ 687.905] + File destination: tmp:/mDns.brs.
[ 687.906] + Attempting download of: mDns.brs.
[ 687.906] + === Started provisioning timeout timer
[ 687.910] + ProcessWellKnownHostResponse: status code = -6
[ 687.910] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 687.910] + === 4f: B-Deploy Cloud returned status code 204. Proceed with the other methods.
[ 687.910] + === 5f: mDns returned an error. Proceed with other methods
[ 688.718] + === 2b: kick off the other provisioning methods and start a timeout timer
[ 688.719] + File source: http://brightsign-b-deploy/.
[ 688.720] + File destination: tmp:/wellKnownHost.brs.
[ 688.720] + Attempting download of: wellKnownHost.brs.
[ 688.727] + File source: https://provision.brightsignnetwork.com/rest/.
[ 688.727] + File destination: tmp:/bDeployCloud.brs.
[ 688.735] + Attempting download of: bDeployCloud.brs.
[ 688.736] + File source: http://brightsign-b-deploy.local/.
[ 688.736] + File destination: tmp:/mDns.brs.
[ 688.736] + Attempting download of: mDns.brs.
[ 688.736] + === Started provisioning timeout timer
[ 688.737] + ProcessBDeployCloudResponse: status code = -10001
[ 688.737] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 688.737] + === 4. B-Deploy Cloud has not responded.
[ 688.737] + === 5f: mDns returned an error. Proceed with other methods
[ 688.737] + ProcessWellKnownHostResponse: status code = -6
[ 688.737] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 688.737] + === 4. B-Deploy Cloud has not responded.
[ 688.737] + === 5f: mDns returned an error. Proceed with other methods
[ 688.737] + ProcessMDnsResponse: status code = -10001
[ 688.737] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 688.737] + === 4. B-Deploy Cloud has not responded.
[ 688.737] + === 5f: mDns returned an error. Proceed with other methods
[ 689.324] + === 2b: kick off the other provisioning methods and start a timeout timer
[ 689.326] + File source: http://brightsign-b-deploy/.
[ 689.326] + File destination: tmp:/wellKnownHost.brs.
[ 689.326] + Attempting download of: wellKnownHost.brs.
[ 689.333] + File source: https://provision.brightsignnetwork.com/rest/.
[ 689.333] + File destination: tmp:/bDeployCloud.brs.
[ 689.341] + Attempting download of: bDeployCloud.brs.
[ 689.342] + File source: http://brightsign-b-deploy.local/.
[ 689.342] + File destination: tmp:/mDns.brs.
[ 689.342] + Attempting download of: mDns.brs.
[ 689.342] + === Started provisioning timeout timer
[ 689.342] + ProcessBDeployCloudResponse: status code = -10001
[ 689.342] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 689.342] + === 4. B-Deploy Cloud has not responded.
[ 689.342] + === 5f: mDns returned an error. Proceed with other methods
[ 689.342] + ProcessWellKnownHostResponse: status code = -6
[ 689.342] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 689.342] + === 4. B-Deploy Cloud has not responded.
[ 689.342] + === 5f: mDns returned an error. Proceed with other methods
[ 689.342] + ProcessMDnsResponse: status code = -10001
[ 689.342] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 689.342] + === 4. B-Deploy Cloud has not responded.
[ 689.343] + === 5f: mDns returned an error. Proceed with other methods
[ 689.744] + === 2b: kick off the other provisioning methods and start a timeout timer
[ 689.780] + File source: http://brightsign-b-deploy/.
[ 689.780] + File destination: tmp:/wellKnownHost.brs.
[ 689.781] + Attempting download of: wellKnownHost.brs.
[ 689.788] + File source: https://provision.brightsignnetwork.com/rest/.
[ 689.788] + File destination: tmp:/bDeployCloud.brs.
[ 689.796] + Attempting download of: bDeployCloud.brs.
[ 689.797] + File source: http://brightsign-b-deploy.local/.
[ 689.797] + File destination: tmp:/mDns.brs.
[ 689.797] + Attempting download of: mDns.brs.
[ 689.797] + === Started provisioning timeout timer
[ 689.817] + ProcessBDeployCloudResponse: status code = -10001
[ 689.817] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 689.817] + === 4. B-Deploy Cloud has not responded.
[ 689.817] + === 5f: mDns returned an error. Proceed with other methods
[ 689.817] + ProcessWellKnownHostResponse: status code = -6
[ 689.817] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 689.817] + === 4. B-Deploy Cloud has not responded.
[ 689.817] + === 5f: mDns returned an error. Proceed with other methods
[ 689.817] + ProcessMDnsResponse: status code = -10001
[ 689.817] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 689.817] + === 4. B-Deploy Cloud has not responded.
[ 689.817] + === 5f: mDns returned an error. Proceed with other methods
[ 690.001] + === 2b: kick off the other provisioning methods and start a timeout timer
[ 690.003] + File source: http://brightsign-b-deploy/.
[ 690.003] + File destination: tmp:/wellKnownHost.brs.
[ 690.004] + Attempting download of: wellKnownHost.brs.
[ 690.011] + File source: https://provision.brightsignnetwork.com/rest/.
[ 690.011] + File destination: tmp:/bDeployCloud.brs.
[ 690.019] + Attempting download of: bDeployCloud.brs.
[ 690.020] + File source: http://brightsign-b-deploy.local/.
[ 690.020] + File destination: tmp:/mDns.brs.
[ 690.020] + Attempting download of: mDns.brs.
[ 690.020] + === Started provisioning timeout timer
[ 690.020] + ProcessBDeployCloudResponse: status code = -10001
[ 690.020] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 690.020] + === 4. B-Deploy Cloud has not responded.
[ 690.020] + === 5f: mDns returned an error. Proceed with other methods
[ 690.020] + ProcessMDnsResponse: status code = -10001
[ 690.020] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 690.020] + === 4. B-Deploy Cloud has not responded.
[ 690.020] + === 5f: mDns returned an error. Proceed with other methods
[ 690.020] + ProcessWellKnownHostResponse: status code = -6
[ 690.020] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 690.020] + === 4. B-Deploy Cloud has not responded.
[ 690.020] + === 5f: mDns returned an error. Proceed with other methods
[ 690.136] + === 2b: kick off the other provisioning methods and start a timeout timer
[ 690.228] + File source: http://brightsign-b-deploy/.
[ 690.228] + File destination: tmp:/wellKnownHost.brs.
[ 690.228] + Attempting download of: wellKnownHost.brs.
[ 690.236] + File source: https://provision.brightsignnetwork.com/rest/.
[ 690.236] + File destination: tmp:/bDeployCloud.brs.
[ 690.244] + Attempting download of: bDeployCloud.brs.
[ 690.245] + File source: http://brightsign-b-deploy.local/.
[ 690.245] + File destination: tmp:/mDns.brs.
[ 690.245] + Attempting download of: mDns.brs.
[ 690.245] + === Started provisioning timeout timer
[ 690.272] + ProcessBDeployCloudResponse: status code = -10001
[ 690.272] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 690.272] + === 4. B-Deploy Cloud has not responded.
[ 690.272] + === 5f: mDns returned an error. Proceed with other methods
[ 690.272] + ProcessMDnsResponse: status code = -10001
[ 690.272] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 690.272] + === 4. B-Deploy Cloud has not responded.
[ 690.272] + === 5f: mDns returned an error. Proceed with other methods
[ 690.272] + ProcessWellKnownHostResponse: status code = -6
[ 690.272] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 690.272] + === 4. B-Deploy Cloud has not responded.
[ 690.272] + === 5f: mDns returned an error. Proceed with other methods
[ 690.349] + === 2b: kick off the other provisioning methods and start a timeout timer
[ 690.447] + File source: http://brightsign-b-deploy/.
[ 690.447] + File destination: tmp:/wellKnownHost.brs.
[ 690.447] + Attempting download of: wellKnownHost.brs.
[ 690.454] + File source: https://provision.brightsignnetwork.com/rest/.
[ 690.455] + File destination: tmp:/bDeployCloud.brs.
[ 690.463] + Attempting download of: bDeployCloud.brs.
[ 690.464] + File source: http://brightsign-b-deploy.local/.
[ 690.464] + File destination: tmp:/mDns.brs.
[ 690.465] + Attempting download of: mDns.brs.
[ 690.465] + === Started provisioning timeout timer
[ 690.486] + ProcessBDeployCloudResponse: status code = -10001
[ 690.486] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 690.486] + === 4. B-Deploy Cloud has not responded.
[ 690.486] + === 5f: mDns returned an error. Proceed with other methods
[ 690.486] + ProcessWellKnownHostResponse: status code = -6
[ 690.486] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 690.486] + === 4. B-Deploy Cloud has not responded.
[ 690.486] + === 5f: mDns returned an error. Proceed with other methods
[ 690.486] + ProcessMDnsResponse: status code = -10001
[ 690.486] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 690.486] + === 4. B-Deploy Cloud has not responded.
[ 690.486] + === 5f: mDns returned an error. Proceed with other methods
[ 690.509] + === 2b: kick off the other provisioning methods and start a timeout timer
[ 690.510] + File source: http://brightsign-b-deploy/.
[ 690.510] + File destination: tmp:/wellKnownHost.brs.
[ 690.510] + Attempting download of: wellKnownHost.brs.
[ 690.511] + File source: https://provision.brightsignnetwork.com/rest/.
[ 690.511] + File destination: tmp:/bDeployCloud.brs.
[ 690.520] + Attempting download of: bDeployCloud.brs.
[ 690.521] + File source: http://brightsign-b-deploy.local/.
[ 690.521] + File destination: tmp:/mDns.brs.
[ 690.521] + Attempting download of: mDns.brs.
[ 690.521] + === Started provisioning timeout timer
[ 690.521] + ProcessBDeployCloudResponse: status code = -10001
[ 690.521] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 690.521] + === 4. B-Deploy Cloud has not responded.
[ 690.521] + === 5f: mDns returned an error. Proceed with other methods
[ 690.521] + ProcessWellKnownHostResponse: status code = -6
[ 690.521] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 690.521] + === 4. B-Deploy Cloud has not responded.
[ 690.521] + === 5f: mDns returned an error. Proceed with other methods
[ 690.543] + ProcessMDnsResponse: status code = -10001
[ 690.543] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 690.543] + === 4. B-Deploy Cloud has not responded.
[ 690.543] + === 5f: mDns returned an error. Proceed with other methods
[ 690.705] + === 2b: kick off the other provisioning methods and start a timeout timer
[ 690.725] + File source: http://brightsign-b-deploy/.
[ 690.725] + File destination: tmp:/wellKnownHost.brs.
[ 690.726] + Attempting download of: wellKnownHost.brs.
[ 690.733] + File source: https://provision.brightsignnetwork.com/rest/.
[ 690.733] + File destination: tmp:/bDeployCloud.brs.
[ 690.741] + Attempting download of: bDeployCloud.brs.
[ 690.743] + File source: http://brightsign-b-deploy.local/.
[ 690.743] + File destination: tmp:/mDns.brs.
[ 690.743] + Attempting download of: mDns.brs.
[ 690.743] + === Started provisioning timeout timer
[ 690.764] + ProcessBDeployCloudResponse: status code = -10001
[ 690.764] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 690.764] + === 4. B-Deploy Cloud has not responded.
[ 690.764] + === 5f: mDns returned an error. Proceed with other methods
[ 690.764] + ProcessWellKnownHostResponse: status code = -6
[ 690.764] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 690.764] + === 4. B-Deploy Cloud has not responded.
[ 690.764] + === 5f: mDns returned an error. Proceed with other methods
[ 690.784] + ProcessMDnsResponse: status code = -10001
[ 690.784] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 690.784] + === 4. B-Deploy Cloud has not responded.
[ 690.784] + === 5f: mDns returned an error. Proceed with other methods
[ 690.899] + === 2b: kick off the other provisioning methods and start a timeout timer
[ 690.933] + File source: http://brightsign-b-deploy/.
[ 690.933] + File destination: tmp:/wellKnownHost.brs.
[ 690.933] + Attempting download of: wellKnownHost.brs.
[ 690.941] + File source: https://provision.brightsignnetwork.com/rest/.
[ 690.941] + File destination: tmp:/bDeployCloud.brs.
[ 690.949] + Attempting download of: bDeployCloud.brs.
[ 690.950] + File source: http://brightsign-b-deploy.local/.
[ 690.950] + File destination: tmp:/mDns.brs.
[ 690.950] + Attempting download of: mDns.brs.
[ 690.950] + === Started provisioning timeout timer
[ 690.971] + ProcessBDeployCloudResponse: status code = -10001
[ 690.971] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 690.971] + === 4. B-Deploy Cloud has not responded.
[ 690.971] + === 5f: mDns returned an error. Proceed with other methods
[ 690.971] + ProcessWellKnownHostResponse: status code = -6
[ 690.971] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 690.971] + === 4. B-Deploy Cloud has not responded.
[ 690.971] + === 5f: mDns returned an error. Proceed with other methods
[ 690.971] + ProcessMDnsResponse: status code = -10001
[ 690.971] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 690.971] + === 4. B-Deploy Cloud has not responded.
[ 690.971] + === 5f: mDns returned an error. Proceed with other methods
[ 691.096] + === 2b: kick off the other provisioning methods and start a timeout timer
[ 691.140] + File source: http://brightsign-b-deploy/.
[ 691.140] + File destination: tmp:/wellKnownHost.brs.
[ 691.141] + Attempting download of: wellKnownHost.brs.
[ 691.148] + File source: https://provision.brightsignnetwork.com/rest/.
[ 691.148] + File destination: tmp:/bDeployCloud.brs.
[ 691.156] + Attempting download of: bDeployCloud.brs.
[ 691.157] + File source: http://brightsign-b-deploy.local/.
[ 691.157] + File destination: tmp:/mDns.brs.
[ 691.157] + Attempting download of: mDns.brs.
[ 691.157] + === Started provisioning timeout timer
[ 691.177] + ProcessBDeployCloudResponse: status code = -10001
[ 691.177] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 691.177] + === 4. B-Deploy Cloud has not responded.
[ 691.177] + === 5f: mDns returned an error. Proceed with other methods
[ 691.177] + ProcessWellKnownHostResponse: status code = -6
[ 691.177] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 691.177] + === 4. B-Deploy Cloud has not responded.
[ 691.177] + === 5f: mDns returned an error. Proceed with other methods
[ 691.177] + ProcessMDnsResponse: status code = -10001
[ 691.177] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 691.177] + === 4. B-Deploy Cloud has not responded.
[ 691.177] + === 5f: mDns returned an error. Proceed with other methods
[ 691.766] + ProcessBDeployCloudResponse: status code = 204
[ 691.766] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 691.766] + === 4f: B-Deploy Cloud returned status code 204. Proceed with the other methods.
[ 691.766] + === 5f: mDns returned an error. Proceed with other methods
[ 706.319] + ProcessMDnsResponse: status code = -6
[ 706.319] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 706.319] + === 4f: B-Deploy Cloud returned status code 204. Proceed with the other methods.
[ 706.319] + === 5f: mDns returned an error. Proceed with other methods
[ 721.158] + NoScriptFoundHandler: Provisioning timer fired; no provisioning sources replied
[ 820.587] + === 2b: kick off the other provisioning methods and start a timeout timer
[ 820.588] + File source: http://brightsign-b-deploy/.
[ 820.588] + File destination: tmp:/wellKnownHost.brs.
[ 820.594] + Attempting download of: wellKnownHost.brs.
[ 820.597] + File source: https://provision.brightsignnetwork.com/rest/.
[ 820.597] + File destination: tmp:/bDeployCloud.brs.
[ 820.605] + Attempting download of: bDeployCloud.brs.
[ 820.606] + File source: http://brightsign-b-deploy.local/.
[ 820.606] + File destination: tmp:/mDns.brs.
[ 820.607] + Attempting download of: mDns.brs.
[ 820.607] + === Started provisioning timeout timer
[ 820.611] + ProcessWellKnownHostResponse: status code = -6
[ 820.611] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 820.611] + === 4f: B-Deploy Cloud returned status code 204. Proceed with the other methods.
[ 820.611] + === 5f: mDns returned an error. Proceed with other methods
[ 821.459] + ProcessBDeployCloudResponse: status code = 204
[ 821.459] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 821.459] + === 4f: B-Deploy Cloud returned status code 204. Proceed with the other methods.
[ 821.459] + === 5f: mDns returned an error. Proceed with other methods
[ 835.851] + ProcessMDnsResponse: status code = -6
[ 835.851] + === 3b: Well-Known Host returned CURLE_COULDNT_RESOLVE_HOST
[ 835.851] + === 4f: B-Deploy Cloud returned status code 204. Proceed with the other methods.
[ 835.851] + === 5f: mDns returned an error. Proceed with other methods
[ 850.607] + NoScriptFoundHandler: Provisioning timer fired; no provisioning sources replied
Any suggestions?
Thanks,
