I have a BrightSign HD224 player. I want to set it up so that it turns the CASIO projector on and off each day at a certain time. I'm using the 3.5MM IR port out on the player, which according to documentation is Port 1 in Bright Author. In Bright Author version 4.7.2.12 I'm using the Send String (EOL) and sending PWR0 and PWR1 using a crossover cable with a 3.5MM to DB9 connector. I'm using GPIO button "0" as a test to trigger the turning ON and OFF. The projector will not respond. The baud settings in Bright Author match the CASIO projector's specs: 19200, 8, N, 1. The Projector settings have been adjusted to allow remote ON/ OFF commands.
Things I've tried:
Send String (noEOL)
Sending the ASCII PWR0 and PWR1 with and without parentheses (PWR1) (PWR0) as shown in the manual.
Making the 3.5MM to DB9 a pass-through cable instead of a crossover cable.
Nothing works.
Any ideas would be appreciated.
Thanks!
