0

Scheduled video with UDP interrupts

Parenzo Farnizi

March 03, 2023 12:28

None

Follow

Hi!

i'm trying to achieve something fairly easy but i can't find enough informations to do so.

I would like to have a video loop, with video based on the time (eg. video A from 0 to 12, video B from 12 to 24) and then switch to another state when an UDP message is received

I can integrate the UDP side of the thing, but i can't manage to change video based on the current time, i know i can do it in the schedule section but i would have to repeate my UDP logic for each video slot i want to create. 

Am i doing something wrong?

• Facebook
• Twitter
• LinkedIn

2 comments

• 1
  
  Monica Knutson March 08, 2023 16:27

  Hello Parenzo,

  Have you tried using the Time/Clock interactive event?  Sometimes in the toolbar menu, you have to enable it.  Here is the documentation for this tool:

  BrightAuthor 4.7:
  https://brightsign.atlassian.net/wiki/spaces/DOC/pages/370671938/Time+Clock 

  BrightAuthor:connected:
  https://brightsign.atlassian.net/wiki/spaces/DOC/pages/388432930/Event+Properties#EventProperties-Time%2FClockEvent 

  We have used this successfully - you just need to ensure that your device's clock is set correctly.  You can do that by ensuring it's setup with the proper Time Zone during setup.  You can also set the clock using the device's diagnostic web page (if enabled during setup).

  Cheers,
  Monica

• 0
  
  Parenzo Farnizi March 31, 2023 13:23

  Thanks!