New post
0

LED Video Wall

Avatar
David Peabody
None
Follow

I'm trying to set up a 3000mm x 3000mm LED display.  .6 pixel pitch, on a BrightSign HD1025.  What's the best way to handle this in BrightAuthor?  I can find where to set the display size in BrightWall Configuration but what's the best way to set the resolution.

Date Votes

2 comments

  • 0
    Avatar
    JRB Technical

    Use the next largest standard resolution for the BrightSign player from LED size, then set the Zone Size in BrightAuthor to be the same as the LED Resolution pixel for pixel.

    For example a 9x5 wall (192x192 pixels each) for a Zone Size of 1728x960 with a Video Resolution of 1920x1080. Then all content in the Zone should match the LED wall pixel for pixel.

  • 0
    Avatar
    Monica Knutson

    @JRB Technical

    Curious if this same thing would work on a non-standard resolution small screen (like Pi sized).  We're doing a periscope using two small screens that play a video.  However, the screens are 800x480 resolution.  The closest BA resolution is 800x600.  Hmm... worth a test!

Please sign in to leave a comment.