New post
0

RS232 Strings to play images

Avatar
Georg
None
Follow


Hi, I try to configure the auto.xml for HD410 to trigger three jpgs (0,1,2) from RS232 strings. I can trigger jpg1 or jpg2 if jpg0 plays, that`s okay. If I the trigger with a second RS String from jpg1 or jpg 2 back to jpg0, it doesn`t work. Only RS strings programmed to jpg 0 are accepted. Is this normal, what`s wrong?
Date Votes

10 comments

  • 0
    Avatar
    RokuLyndon


    I have to assume that you don't have every image set to receive serial input.

    In order to go from any image to another other image, you must have connections going from each image to the other. So, zero  needs to accept input for 1 and 2, 1 needs to accept input for 0 and 2, and 2 needs to accept input for 0 and 1.

    This might be what you have currently:

    http://dl.dropbox.com/u/3480052/Screenshots/serial_wrong1.JPG


    This is what your project should look like:

    http://dl.dropbox.com/u/3480052/Screenshots/serial_correct1.JPG
  • 0
    Avatar
    Georg


    Thank for your fast reply, but every image point to the other, like the diagram  you`ve send - but only the RS-Strings accepted when the first image plays. Can I send the auto..xml ?
  • 0
    Avatar
    RokuLyndon


    If you could do a file save as, and send me the project file, that would be better.
  • 0
    Avatar
    Georg


    Sorry, but who can I post the projectfile in this forum?
  • 0
    Avatar
    RokuLyndon



    I'm sorry. Send it to me at support@brightsign.biz

  • 0
    Avatar
    Georg


    okay, done
  • 0
    Avatar
    Georg


    Now I`ve send my projectfile three times, but nothing happend. Have you still received my mail? No response the last five days...
  • 0
    Avatar
    RokuLyndon


    Your project files came through but I've hadn't been able t open and view the contents of your files. They just kept comeing up as if they were empty.

    Maybe, we should take another approach.

    On the flash card, there's an autorun file that you can open in any text editor. Set the debugon and loggingon values to TRUE. Then try it again. Now, the input the unit receives will be stored in a log.txt file on the flash card.

    The same project you describe is working fine for me. There must be something we're missing. Also try this test script. It has a readme that shows what serial commands it accepts. You can put some files on a card with it, and send play and stop and loop commands to start and stop different files on the card.

    Serial / UDP COntrol Script
  • 0
    Avatar
    Georg


    I´ve generate the projectfile with BrightAuthor V 2.0.0.23 - pubished in folder, archiv the folder to Test.rar. Please unzip, so you can see all the generated files. I try to send the strings "image1", "image2" and "image3". I`ve packed all the necessary files into "Test.rar"  - the publishfolder (T1)and the T1.bpf-file. Do you get this files? -  I´ve send the packed folder "test.rar" onceagain. I can monitor the echo of the input String with the terminalprogramm - it looks correct. Please remember, that the first string that was send after restart the 410 are accept and I can select image 2 or image 3 play. The next command, to play another image are not accepted, but I can see the correct echostring. Your controlscript is only for videoplay, but I try to activate images.
  • 0
    Avatar
    Georg


    Have you received my projectfile, regarding last post?
Please sign in to leave a comment.