0

Simple Networking transfer error-loop



Hello again! I was setting up the first of many HD1010 to work with Simple Networking. Booted with a "setup-card" and everything worked fine. The player downloaded its content from the webserver. After 5min, it was time to check the server for changes. Changes was found and the content downloaded. The player reboots and new content was shown on the screen. But... in the console i got this message, that goes on and on and on..... Preloaded file in PreloadImage: freeze.JPG [len=43] <LF>2009/10/14 22:23:12.760 [len=24] <LF>### prepare to wait for next event [len=35] <LF>2009/10/14 22:23:12.763 [len=24] <LF>### url_event 1 <LF>### UploadDeviceDownload [len=25] <LF>2009/10/14 22:23:12.767 [len=24] <LF>### url_event 1 <LF>### UploadDeviceDownload [len=25] <LF>2009/10/14 22:23:12.772 [len=24] <LF>### url_event 1 <LF>### UploadDeviceDownload [len=25] <LF>2009/10/14 22:23:12.776 [len=24] <LF>### url_event 1 <LF>### UploadDeviceDownload [len=25] <LF>2009/10/14 22:23:12.780 [len=24] <LF>### url_event 1 <LF>### URLTrafficDownloadXferEvent: 404 [len=39] <LF>### UploadTrafficDownload [len=26] <LF>2009/10/14 22:23:12.794 [len=24] <LF>### url_event 1 <LF>### UploadEvent 1 <LF>2009/10/14 22:23:12.798 [len=24] <LF>### url_event 1 <LF>### URLTrafficDownloadXferEvent: 404 [len=39] <LF>### UploadTrafficDownload [len=26] <LF>2009/10/14 22:23:12.812 [len=24] <LF>### url_event 1 <LF>### URLTrafficDownloadXferEvent: 404 [len=39] <LF>### UploadTrafficDownload [len=26] <LF>2009/10/14 22:23:12.826 [len=24] <LF>### url_event 1 Does anybody know what to do 1 //Dan

3 comments

  • 0
    Avatar
    RokuLyndon


    There's some excessive error output to the server in the original brightauthor 2.0 release. Try this version, build 40.
  • 0
    Avatar
    Dannoo7


    With build40 i don't get any auto-search for new material nor any outputs over rs232 :/

    //Dan
  • 0
    Avatar
    RokuLyndon


    40 has debug mode turned off by default. that's why no extra output on serial. If you want to see that serial, open the autorun.brs on the flash card, and set debugon to TRUE.
Please sign in to leave a comment.