different display quality with same lcd's in synchro

Hi,

I'm coming to you because there is a problem i can't resolve.
I got 9 brightsigns hd210 and 9 Samsung 460-ux3 LCD screens. (linked with hdmi)
I m used to play a big video on it using a dlink switch and LAN cables.
The problem is that it always suffers of one or two screens displaying not as good as the others.

On these ones, the picture :
- has more pastel colors
- doesn't feed exactly the entire screen (and so is not well alignated with the other parts of the video)
- vibrate a little bit

As i launch simultanously the whole system, all the screens turn on. Good screens become a little bit less dark, recieving the brightsigns signals, waiting for media and i can already see that the screen(s) going to be bad, are more luminosous, like à bad grey.

Some points :
- the problem is not attached to one or two of the screen i got, if i stop the system, invert 2 screens and relaunch, the problem stays at the position it was, not on the screen. (this point let me think it comes from the streaming system)
- i got one or two bad pictures for a 9 screens installation, and zéro or one bad picture for a 3 screens installation. So i never succeed to install 9 screens without this problem.
- one of the most strange thing : if i launch the osd of a screen presenting a bad picture, the menu is different than the others one. For instance, in picture settings preset, i will have the choice between "promotion", "entertainment" or "cinema" where the others propose "dynamic","normal", "movie" (i m not exactly sure of the words). If i remove this screen from the sync. 9 scr. Install. and i just connect to it one brightsign, picture and osd become ok.

As I powered on all simultanously, I was thinking first some screens didn't have the time to start properly. So i got now a system to launch first the screens and brightsigns + switch are powered 2 minutes later. Unfortunately, it didn't resolve the problem.

So, if you have found the patience to read, perhaps you could give me some ideas !?

Hi, I'm coming to you because there is a problem i can't resolve. I got 9 brightsigns hd210 and 9 Samsung 460-ux3 LCD screens. (linked with hdmi) I m used to play a big video on it using a dlink switch and LAN cables. The problem is that it always suffers of one or two screens displaying not as good as the others. On these ones, the picture : - has more pastel colors - doesn't feed exactly the entire screen (and so is not well alignated with the other parts of the video) - vibrate a little bit As i launch simultanously the whole system, all the screens turn on. Good screens become a little bit less dark, recieving the brightsigns signals, waiting for media and i can already see that the screen(s) going to be bad, are more luminosous, like à bad grey. Some points : - the problem is not attached to one or two of the screen i got, if i stop the system, invert 2 screens and relaunch, the problem stays at the position it was, not on the screen. (this point let me think it comes from the streaming system) - i got one or two bad pictures for a 9 screens installation, and zéro or one bad picture for a 3 screens installation. So i never succeed to install 9 screens without this problem. - one of the most strange thing : if i launch the osd of a screen presenting a bad picture, the menu is different than the others one. For instance, in picture settings preset, i will have the choice between "promotion", "entertainment" or "cinema" where the others propose "dynamic","normal", "movie" (i m not exactly sure of the words). If i remove this screen from the sync. 9 scr. Install. and i just connect to it one brightsign, picture and osd become ok. As I powered on all simultanously, I was thinking first some screens didn't have the time to start properly. So i got now a system to launch first the screens and brightsigns + switch are powered 2 minutes later. Unfortunately, it didn't resolve the problem. So, if you have found the patience to read, perhaps you could give me some ideas !?