0

master and slave

contact_faltaziprod.com

February 17, 2012 22:06

None

Follow

Hi again from France, I have two brightsign units : HD 1010 and HD 210 Is it possible to connect HD 210 to an elotouch monitor (VGA, and USB) to display a menu and control HD 1010 wich display a program on another monitor 1 HD210 does not have GPIO control. Can I use ethenet cable betwenn the two units 1 Thanks

• Facebook
• Twitter
• LinkedIn

4 comments

• 0
  
  RokuLyndon February 18, 2012 00:21

  
  
  Yes, you can do this using ethernet. We've had many customers do this...
  
• 0
  
  contact_faltaziprod.com February 18, 2012 01:34

  
  
  Thanks
  
  Do I need to use a computer or can connect directly the two brightsign units using an ethernet cable ?
  
  Can I lauch differents video in the slave from differents menus in the master ?
  
  Is there a script to write ?
  
• 0
  
  RokuLyndon February 18, 2012 02:45

  
  
  You don't need a script, just a brightauthor project on each. You can setup the master unit to send udp commands to the slave unit when you push a button, and then on the slave, you listen for udp commands to tell you what videos or files to play.
  
  You don't need a computer except to create the master and slave files for the two brightsigns.
  
  I would check out the interactive video in our tutorials section that covers making interactive projects. It covers how interactives work.
  
• 0
  
  contact_faltaziprod.com February 18, 2012 03:28

  
  
  thank you very much