brightsign with Motion Sensor
i have recently installed my first Brightsign 410's and 810' and managed set up the interactive playlist to get the attract screen jpg and gpio button 0 to play the video as I needed. I used three of them with microwave motion sensors and three with pushbuttons. I there a way to have the gpio input be inactive until the associated video completes it's run time. I used a small PLC to lock out operation of the button/sensor after it's activation and then run a timer that reactivates the button/sensor at the end of the video. Can the Brightsign do this internally. Without the PLC the first button push would activate the video,but pushing it again would stop it and a third push would restart the video.
