I am running a HD810 to loop a video for 13 hrs, then showing a still black image, then start the looping again. Also, there is a single button that will stop the video and show a still image until pressed again, then the video loop starts again. The button interactivity is controlled via .csv and was working fine until I added the manual scheduling at this link https://www.brightsignnetwork.com/download/Scripts/date_time.zip
The other issue I am having is that on a few occasions after the schedule starts the video after being in the still, the video file plays audio only(out the analog) and no video signal is output through HDMI. A restart fixes the playback for a while. I am using .mov files and I was running the 3.5.68 firmware. I updated firmware to 3.7.44 and still have the same problem with the button not working. I tried shorting the pins on the GPIO port and still not button reaction, and my button wiring is working correctly bh
