Thanks!
Date
Votes
2 comments
-
Reid Bingham I am looking at the demos and see that 3x1 video wall for 220 and 210 boxes does mention anything about clearing IP address. But in the 1x2 and 2x2 video wall demos for 210 boxes there is a mention of clearing IP address. Do the 220 boxes not need to have their IP address cleared? We are having trouble syncing a few 220s and the old IP reset scripts do not work on them.
To give some info about what we are trying to do, we are trying to sync several 220s over a hub. I have not used these yet so I set them up like I would the 210s with identical IP addresses and UDP Destination and Receiver ports. For the 3x1 video wall demo though I see that presentation has selected "All devices on local subnet." Should this be selected just for 220s or can it also be used for 210s? Thank you so much in advance for helping clear this up!Best,
-Reid
-
Lyndon You can use brightauthor to create standalone setup files that will manually set the IP of the unit.
I have attached a script that will reset your unit to factory defaults.
If you use all devices on local subnets, then you don't have to set IP addresses on any of the units, including the master. You can use just them with no manual IPs set.
See this faq for manual IP details if you still want them..
The attached pdfs in this faq have detailed directions.
Please sign in to leave a comment.