New post
0

BrightControl CEC commands

Avatar
Lance Lander
None
Follow

If you use BrightControl to send Ascii string "400D" it will turn the display "on" via CEC over HDMI. The Ascii string "4036" will turn the display "off".  Im trying to find the Ascii string to change inputs.  Does anyone know where to find a list of CEC commands?

Date Votes

36 comments

  • 0
    Avatar
    Luke Hawley

    Hi,

    I am trying to change between HDMI 1 and HDMI 2 on a Samsung NU7100 using a Brightsign HD3.

    I have tried the above ASCII codes and i cannot get it to switch inputs. I am sending UDP commands to switch content and I want to be able to switch between Brightsign on HDMI 1 to a live camera feed on HDMI 2

    If I use the remote and switch to HDMI 2 and then i send a UDP command to the brightsign the TV does switch back to HDMI 1 but I can not get it to go back the other way.

     

    Any ideas?

  • 0
    Avatar
    Lance Lander

    Hi Luke,

     

    Were you able to find a solution?

    you would have to make the current input inactive then send the input change. So, using BrightControl - Send ascii string - 409D2100.

    The "9D" makes the current input (HDMI-1) inactive and the 2100 changes to HDMI input 2.

  • 0
    Avatar
    Patrick Linabury

    I am in a similar situation with older LG monitors. I use 400D to turn them on and it worked. 4036 did not turn them off. Is there another value I should try? (I am using LG 42 LD5200 monitors)

  • 0
    Avatar
    Lance Lander

    4036 is the "off" command. I know some Samsung models you have to turn on the "anytime off" setting. The "on" command will work but the "off" command won't until you change the settings. I'm not sure about LG monitors.

  • 0
    Avatar
    Tony - Flook Digital Media

    We are controlling video walls using a 4 button panel connected via GPIO to trigger UDP on a 3X3 Wall with 9 Samsung BET55" Business Model. 

    We have found that 4F822000 works to change from HDMI-1 to HDMI-2 

    Works great

  • 0
    Avatar
    Dilyan Nalbantov

    Hello Everyone.

    I was wondering if anyone has any info on the way to handle display power on and off, of integrated brightsign players model HS145.

    Has any one had any experience, is it still trough CEC commands?
    Specifically for МОКА 32DS60P displays?

    I need to be able to switch the input from the Brightsign player, to the HDMI input.

    I was wondering if there are any specific commands for the internal players, or the communication is still trough CEC.

    Also, does anyone have link to the excel sheet with the CEC commands?

Please sign in to leave a comment.