New post
0

HD2000 Composite output

Avatar
redrick
None
Follow


Hello,
I'm trying to use the resolution 720x576x50p by the composite output on a full hd 42" monitor.
The screen flickers and shows the video in this way:
- a kind of vertical black strip in the center of the monitor (flickering too)
- two videos (the video I want) at right and left side of the monitor

Can be an output problem or a monitor problem?
Consider that the same videos work in VGA in 1024x768x60p.

Thank you

Edit----
note that without memory the HD2000 displays a screen divided in 2 parts (left and right) with the Roku logo and version 1.3.31 in both sides
Date Votes

4 comments

  • 0
    Avatar
    RokuLyndon


    Which monitor brand and model are you using? If you use a higher resolution over component, does that give you the same problem?



    Lyndon
  • 0
    Avatar
    redrick


    "RokuLyndon" wrote:

    Which monitor brand and model are you using? If you use a higher resolution over component, does that give you the same problem?

    Lyndon


    The monitor is a GDS MOLVT4200C. It's an industrial model for digital signage. Using an higher resolution over component the video becomes not visible with high flickering. The screen is filled by a lot of flickering dots.

    Anyway, over the component output seems that no resolution is working properly.

    Any idea?



    ---edit---

    I confirm that VGA works...obviously at VGA resolutions
  • 0
    Avatar
    RokuLyndon


    I'll lookup the monitor specs.
  • 0
    Avatar
    Nic Beavis


    It's highly likely the monitor does not support 576p@50Hz.

    Try the same resolution at 60Hz as a test.



    I'm guessing you meant your wanting to use the YUV (Component) output as there is no composite output.
Please sign in to leave a comment.